83 or 85 240 D, can't figure out how to break the linkage to the fresh air vent in the heater box. Anyone done it before.

Attached Thumbnails

 

__________________
CC: NSA

All things are burning, know this and be released.

82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd

You're four times

It's hard to

more likely to

concentrate on

have an accident

two things

when you're on

at the same time.

a cell phone.

www.kiva.org It's not like there's anything wrong with feeling good, is there?

I'm not for certain, but I think the metal linkage should just pop out of that plastic part. The end of the plastic piece, opposite the end of the linkage, should be hollow, and should allow the linkage to snap out.

Attached Thumbnails

 

__________________

Thanks, that's what I was thinking. Line of sight, screwdriver, 2nd hand. I need 2 of three in there, and I can only get 1 in.

__________________
CC: NSA

All things are burning, know this and be released.

82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd

You're four times

It's hard to

more likely to

concentrate on

have an accident

two things

when you're on

at the same time.

a cell phone.

www.kiva.org It's not like there's anything wrong with feeling good, is there?

I hear ya, dash work can be tough. Lots of working by feel, and scratched up hands. A pair of pliers might do the job if you can get them in there and squeeze the metal end sticking out, to get it out a little then I will come out easier. They kind of snap in, so if you can get it out a little it will slide the rest of the way out a little easier.

__________________