Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-11-2008, 02:35 AM
ik04's Avatar
Diesel-Doer
 
Join Date: Feb 2007
Location: Texas, where else?
Posts: 42
Exclamation Strange overheating!?

Howdy All,

My 1987 300D OM603 has begun overheating strangely:

The car is full of coolant. I filled the engine by pouring the coolant into the top radiator hose.

With the car cooled down, it starts and idles fine and warms up as usual: 80-85 degrees. Extended idling does not make the temperature guage increase at all above 85 degrees.

With the expansion tank cap off and all hoses connected and not leaking, I drive the car for maybe three minutes and the temp guage quickly climbs to redline, 120 degrees in less than a minute.

When I stop the car, the engine is obviously hot. The expansion tank has softened and has a pinhole in it now. The coolant level is still full, but the engine makes surging sounds like the thermostat is opening and closing...

Does this sound like a stuck thermostat? Why does the car run cool at idle to 2500 RPM parked, but overheat as soon as it is driven?

There is no smoke or coolant smell in the exhaust and there are no visible leaks in the system. The coolant level only drops a tiny bit from the hot coolant squirting out of the tiny hole in the tank.

I'll keep RTFMing tomorrow and try to discover what the book says about thermostat problems.

Any help would be appreciated...

Thanks,

Kevin

Oh, and I need a new tank...

__________________
Reply With Quote
  #2  
Old 11-11-2008, 08:48 AM
coonerboy's Avatar
Registered User
 
Join Date: Jul 2008
Location: Herkimer, NY
Posts: 191
[With the expansion tank cap off and all hoses connected and not leaking, I drive the car for maybe three minutes and the temp guage quickly climbs to redline, 120 degrees in less than a minute.]


Why are you running and driving it with the cap off?
__________________
'83 300D 198,000mi Howard
'03 Saturn Vue CVT 75,000mi(wifeys)
Reply With Quote
  #3  
Old 11-11-2008, 01:03 PM
ik04's Avatar
Diesel-Doer
 
Join Date: Feb 2007
Location: Texas, where else?
Posts: 42
Question

Quote:
Originally Posted by coonerboy View Post
[With the expansion tank cap off and all hoses connected and not leaking, I drive the car for maybe three minutes and the temp guage quickly climbs to redline, 120 degrees in less than a minute.]


Why are you running and driving it with the cap off?
Howdy. There is now a hole melted in tank. With the cap on, the steaming coolant sprays out the hole.

Would the system not being pressurized cause it to overheat in just seconds? I don't see how..

Thanks,

Kevin
__________________
Reply With Quote
  #4  
Old 11-11-2008, 01:17 PM
compu_85's Avatar
Cruisin on Electric Ave.
 
Join Date: May 2008
Location: La Conner, WA
Posts: 5,234
If the water pump impeller had come loose it might turn just enough at idle but not enough at higher speeds.

-Jason
__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket

Tesla Model 3. 205,000 miles. Been to 48 states!
Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels.
2014 Cadillac ELR
2013 Fiat 500E.
Reply With Quote
  #5  
Old 11-11-2008, 01:52 PM
Registered User
 
Join Date: Sep 2001
Location: central Texas
Posts: 17,281
If the spring in the lower radiator hose has rusted or gone away.... the hose will feel ok but can collapse when the car is being driven... you should not be able to squeeze the LOWER hose together with your hand....
Must fix the hole and pressurize the system to hope to find the original problem...
Reply With Quote
  #6  
Old 11-11-2008, 01:54 PM
coonerboy's Avatar
Registered User
 
Join Date: Jul 2008
Location: Herkimer, NY
Posts: 191
Its likely you have air in you cooling system, if its overheating that quickly. If it was low on coolant for any amount of time, it could have caused air to enter the system. I would start by replacing the expansion tank, then fill the system with coolant. On the 617 its necessary to fill through the upper radiator hose first(disconnected at the radiator) and then top it off through the tank. I'm not sure if this applies to the 603, but it couldn't hurt.
__________________
'83 300D 198,000mi Howard
'03 Saturn Vue CVT 75,000mi(wifeys)
Reply With Quote
  #7  
Old 11-11-2008, 03:28 PM
curtludwig's Avatar
Registered User
 
Join Date: Sep 2008
Posts: 263
You haven't replaced the thermostat lately have you?

See I know this guy who put a thermostat in backwards once and it reacted a lot like yours.

It DEFINATELY wasn't me. Nope, not me at all. Surely I wouldn't do something like that.
__________________
Sadly Benz-less
Reply With Quote
  #8  
Old 11-11-2008, 07:02 PM
Registered User
 
Join Date: Aug 2008
Location: Las Vegas, Nevada
Posts: 61
Possible your system cannot achieve the 16 or so lbs of pressure to keep it from boiling due to the hole in the tank...i know my car will spike to hot quickly with the cap off dont ask me how i know...Also try to get this resolved before you crack your likely #14 head if it still original from 1987..
Also need more info.. did you have a problem thats why you had system open?? or just coolant change ...if coolant change you may not have a full system and needs some more water in the engine from top hose....the stat will be closed if engine is not hot and no water will go in..maybe try warm up and pour coolant mixed with hot water through top hose, so the stat will stay open..Good luck

Arlo
__________________

W211 E550
HVAC/R Certified Technician
Reply With Quote
  #9  
Old 11-11-2008, 07:50 PM
Actros617's Avatar
Ich fahre dieseltypen
 
Join Date: Apr 2008
Location: Oklahoma
Posts: 1,141
I have to break it to you mate but your Cylinder head maybe Cracked, i to had the same problem steam coming out of the radiator fill container and temp Sky rockets fast, end up i had to pay 3K for a new engine, if it goes over 100*C there is a chance of developing a crack in your cylinder head
__________________
Current Garage
2008 Mercedes GL320 CDI 188k mi Repair/Work in progress
1994 S350 160k mi Garage Queen & prepping for repairs
2005 E320 CDI 203k mi Healthy & Daily Driver
1994 S350 357k mi Retried as parts car
1984 300TD 214k mi Blown OM617 Poss OM603 Swap??

Sold
1987 300SDL 200K+
1994 S320 181K mi
2008 E320 Bluetec 127k mi
1999 S420 130K mi
1980 240D 360k mi
15+ Others that has come, stay and gone

GONE, BUT NOT FORGOTTEN
1995 E320 SE 220k mi
1984 300SD 350k mi
Reply With Quote
  #10  
Old 11-11-2008, 08:21 PM
sixto's Avatar
smoke gets in your eyes
 
Join Date: Jun 2000
Location: Eastern TN
Posts: 20,841
What Actros617 said put another way, when my 87 SDL displayed that behavior, there were cracks in the cylinder head.

Sixto
87 300D
Reply With Quote
  #11  
Old 11-11-2008, 08:47 PM
Hatterasguy's Avatar
Zero
 
Join Date: Nov 2002
Location: Milford, CT
Posts: 19,318
First you need to replace the expansion tank, you really can't do much until you do that. Than I'd pull out the T stat and either replace it your put your old one in some hot water to make sure its working. While its out check the lower hose and radiator. When you refill the system, refill it through the upper radiator hose.


More diagnostic's are needed.
__________________
1999 SL500
1969 280SE
2023 Ram 1500
2007 Tiara 3200
Reply With Quote
  #12  
Old 11-14-2008, 12:18 AM
ik04's Avatar
Diesel-Doer
 
Join Date: Feb 2007
Location: Texas, where else?
Posts: 42
Thumbs up Cracked head symtoms?

Quote:
Originally Posted by curtludwig View Post
You haven't replaced the thermostat lately have you?

See I know this guy who put a thermostat in backwards once and it reacted a lot like yours.

It DEFINATELY wasn't me. Nope, not me at all. Surely I wouldn't do something like that.
Howdy,

Now that there is funny ;>) No, I have not changed any engine parts lately.

Thanks to everyone for the responses! I will replace the tank, pull the thermostat and recheck the bottom hose. My hoses and radiator are only two years old, so that would be weird...

Does the area that cracks on the OM603 heads cause cooland to recirculate through the crack or is it a combustion chamber crack? My compression test shows normal pressures all around.

I've always heard about these heads cracking, and I have replaced two of them. Those cracks were in 20 and 22 heads and were in the combustion chamber.

This is the first time I have experienced cooling system/cracked head symptoms on my own car. I guess I'm due.

The coolant is not foamy or mixed with oil. It is clear and green, so I am leaning toward a thermostat issue. The engine ran cool until the day it suddenly overheated.

Please keep sending me ideas to check on. I'll have some time to work on the car next week and I'd like to get to the bottom of this starngeness...

Thanks again,

Kevin
__________________
Reply With Quote
  #13  
Old 11-14-2008, 12:26 AM
Hatterasguy's Avatar
Zero
 
Join Date: Nov 2002
Location: Milford, CT
Posts: 19,318
See how fast it builds pressure when you start it. If its building enough pressure to blow the expansion tank, well you have your answer.
__________________
1999 SL500
1969 280SE
2023 Ram 1500
2007 Tiara 3200
Reply With Quote
  #14  
Old 11-14-2008, 12:28 AM
ik04's Avatar
Diesel-Doer
 
Join Date: Feb 2007
Location: Texas, where else?
Posts: 42
Question yup...

Quote:
Originally Posted by compu_85 View Post
If the water pump impeller had come loose it might turn just enough at idle but not enough at higher speeds.

-Jason
I have had the water pump impeller disintegrate on me before once. That one was made of hard rubber and was not in a Mercedes engine. Aren't these pump impellers always made of metal?

I loosened the top hose while the engine was running and there was flow. It didn't seem like the coolant was pumping very fast, but it was moving...

Oh yeah, there is also another symptom! I have a squeaking noise from the water pump/idler pulley area. That started about two months ago... I didn't think it was significant until now.

Kevin
__________________
Reply With Quote
  #15  
Old 11-14-2008, 10:58 PM
Bob Albrecht's Avatar
Registered User
 
Join Date: Mar 2005
Location: Kennett Square, PA
Posts: 344
Sounds like the water pump, tank, and radiator

If the water pump is squeaking the bearings are about ready to blow. Sqeaking happened to me and I am surprised that it held together once I looked at it. If it does blow I understand it can be very bad for your engine. Replace it now. It is easy and not very expensive. The squeaking could be coming from the idler pulley or alternator also.

The problem isn't the hole in the tank. There is little pressure at normal (85C) operating temperatures. Still, you need to fix that tank because the temperature does go up when climbing hills on a hot day with the AC on. I haven't heard of anyone patching the tank, but maybe it could be done.

The fact that it runs cool at idle, but overheats when you drive it sounds like the radiator, or degraded impeller on the water pump. The thermostat must be working because it would overheat during idle if it didn't. Turning on the heater full blast might make a difference. If it does, then the radiator is indicated. If it does not, then the water pump, which needs replacing anyway, is indicated.

If the idler pulley or tensioner arm are wobbly you might as well replace them too. And if your belt looks worn, do that too.

Don't use anything but Zerex G05 (or Mercedes) coolant with distilled water. The cheap stuff devours your engine so is a false economy.

__________________
1991 350SD (updated rods)
Biodiesel B100 when I can find it.
Dino when really cold outside
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:35 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page