|
|
|
#1
|
|||
|
|||
W124 300D 2.5 Injection Pump Gasket/Seals
Hi List,
Does anyone have the Bosch/MB part #'s for the gaskets and sealed required to re-seal the injection pump on the 2.5 turbo 300D? My '91 300D is leaking from the rack control sensor (on top of the IP) and also the bottom pan area. Thanks. Tan '91 300D 2.5t 312,000 miles '82 240D 4-speed 306,000 miles '87 190Dt 315,000 miles |
#2
|
||||
|
||||
Quote:
You might see if it is here: http://www.detali.ru/cat/oem_mb0.asp?TP=1
__________________
84 300D, 82 Volvo 244Gl Diesel |
#3
|
||||
|
||||
Yeah
try the second Cyrillic Pictogram:
http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=124128_15S&M=602.962&GA=722.418&GM=717.437&CT=M&cat=502&SID=07&SGR=045&SGN=01 AND then compare the part(s) numbers with the MBUSA EPC numbers. http://epc.startekinfo.com/epc/subscribe.jsp EDIT: Bottom seal (May be) 004 997 13 40 [At least that's the Bottom seal on my '90]
__________________
'84 300SD sold 124.128 Last edited by compress ignite; 01-05-2010 at 01:09 AM. |
Bookmarks |
|
|