Help on aux fuse kit for blower motor, 603 engine
 

I have searched and checked out the DIY articles with no luck. The manual leaves me confused.

Anyone BTDT?

Thanks
Harry

Specific questions/problems? It's an easy job.

Jeremy

http://i323.photobucket.com/albums/n.../Fuse_5636.jpg

Thanks for the response Jeremy.

The manual reads, "Pink and Grn wire, connect to input, fuse 16, with terminal from aux wiring harness" It reads like there is something like a screw or nut for this connection, so I'm okay with this part

This is where I'm confused. "blk & grn wire, disconnect from output, fuse 16, and connect with aux wire to single pin terminal block". Huh?

Confession, I have not gone under the fuse box yet or it might be more clear to me. My excuse is that after I searched here, google advanced search and two other sites, I decided to attempt a DIY write up with pictures. I am waiting on a camera I ordered from Woot a few days ago that my BIL says even an idiot can use (me), we'll see.

Walk me through it if you don't mind. BTW, during my search efforts, I saw a number of problems that this upgrade would have benefited.

Thanks for your help.
Harry

Got it done
 

Jeremy
Thanks for your help. I'm going to start a new thread and do a write up with pictures, I hope. This will be my first and pictures are not playing fair.

Thanks
Harry