|
|
|
#1
|
|||
|
|||
Vacuum Pump Rebuild - Early Model (2 valve)
Hi,
I rebuilt the pump and now I'm having doubts. Do both check valves go in the same way? I put the o-rings in first, then the valves and then the springs. I just can't remember if both valves went in with the flat side up or if one was with the flat side up and the other with the flat side down. Also, what is the tube of blue stuff for? I'm assuming to lube the two washer-like things that sandwich the diaphragm. I found it later but can always re-do it. (Should have started this project in the morning...) Any help would be much appreciated as I need to get the pump back on asap. Thanks! Mona 1979 300D |
#2
|
||||
|
||||
Dont remember which way the check valves go, but if you didn't use the 'blue stuff" on the threads of the little center bolt, it would be a good idea to pull the VP again. The blue stuff is a thread locking past that is important here as that little bolt must not be tightened too much (dont ask how I know) and the thread lock stuff is needed particularly in this job. I cant tell you the torque value of that bolt but its not much thats why the 'blue stuff"
__________________
1985 Euro 240D 5 spd 140K 1979 240D 5 spd, 40K on engine rebuild 1994 Dodge/Cummins, 5 spd, 121K 1964 Allice Chalmers D15 tractor 2014 Kubota L3800 tractor 1964 VW bug "Lifes too short to drive a boring car" |
#3
|
||||
|
||||
__________________
Sonny 86 190D N/A 2.5L Auto 265k "Ruby" -Sold- 79 300D 242k "Condi" my first -sold- RIP 2013 chevy sonic hatchback - had to for work |
#4
|
||||
|
||||
Quote:
__________________
1985 Euro 240D 5 spd 140K 1979 240D 5 spd, 40K on engine rebuild 1994 Dodge/Cummins, 5 spd, 121K 1964 Allice Chalmers D15 tractor 2014 Kubota L3800 tractor 1964 VW bug "Lifes too short to drive a boring car" |
#5
|
|||
|
|||
Thanks for the help! Definitely missed this thread when I was searching half asleep last night. Thankfully, the pump has not been put back on since I'm missing the (pump to engine) rubber gasket so it will give me some time to get some more loctite and switch the diaphragm since I put it in convex side facing the engine.
Thanks again! Mona |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|