|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
1987 300TD Rear spindle/knuckle interchange with other w124 wagons?
The passenger side rear wheel bearing on my 87 300TD is worn out and needs replacement.
A local parts yard has a rear knuckle assembly with low miles from a 1994 E320 Wagon. Can anyone confirm for me whether this later model knuckle and wheel hub would interchange with my early model w124 wagon? Or was there a difference between the later model wagons? |
#2
|
|||
|
|||
This site may help figuring this out, car-part.com
Good luck!!!
__________________
"Rudeness is a weak man's imitation of strength" - Eric Hoffer |
#3
|
||||
|
||||
I think you should be good. Afaik it is a wagon specific thing versus the typical sedan
__________________
97 e300d, 78 300Dt, 95 E300d, 94 E320 estate |
#4
|
|||
|
|||
Right, wagon knuckle is unique afaik, I was just hoping that someone could confirm that a 1994 w124 wagon knuckle and hub would be the same as an 1987 w124 wagon.
I used car-part.com to locate the yards locally that have a wagon, but I'm not sure whether I would expect them have authoritative knowledge on w124 wagon knuckle interchangeability |
#5
|
|||
|
|||
Not sure if these threads may answer your question:
OK... W124 Rear bearings are a BEAR to replace Shop having trouble with w124 rear wheel bearing replacement
__________________
1968 220D, w115, /8, OM615, Automatic transmission. My 1987 300TD wagon was sold and my 2003 W210 E320 wagon was totaled (sheds tear). |
#6
|
||||
|
||||
Yes John Vstech and I fixed my (well now it’s his again) 87 300TD rear end with parts from a 90s gas S124 so it is possible.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|