While removing my motor mounts I had the driver side shock absorber mount (aluminum with rubber filled center) completely disintegrate while I while I was trying to remove the engine shock...

I see the price of this new gizmo is over $200.... (is gold plated, maybe)? Anyway, was looking around for a used one to put in and found a guy who is a 'mechanic' that has a used one but he was basically talking me out of it, saying that the engine shock is completely useless..

This guy has no credibility with me so he didn't make me a believer - in fact, I seem to recall reading something quite the opposite, something to the effect that the engine shock absorber is designed to arrest the engine shudder right before the engine comes to a complete stop...

What say you -

Thanks,
James

__________________
1987 Mercedes 300SDL; SOLD
1985 Mercedes 300D; SOLD
2006 Honda Pilot - wife's ride; 122K;
1995 Toyota Land Cruiser - 3X locked; 182K

No, the older models don't have them. My wagon has had one bad one for a long time and it's been fine.

__________________

The non turbos didn't have two anyway. The biggest help is when the engine shuts down, there is a pretty hard last shake.
But $200? From where and do they do your taxes?
Which car?

__________________
83 SD

84 CD

Ho-Hum....

All the Non Turbo cars with 617 in UK have 2 engine shock-dampers...

--One each side. So for that matter, does the Gasser M110 280 engines in the W123.....

Whether they are essential, who knows, Never removed them, never needed to!

200 for a new one seems rather a lot, Sure I saw them somewhere for only 20 quid apiece....

__________________
http://i190.photobucket.com/albums/z...0TDnoplate.jpg

Alastair AKA H.C.II South Wales, U.K. based member

W123, 1985 300TD Wagon, 256K,
-Most recent M.B. purchase, Cost-a-plenty, Gulps BioDiesel extravagantly, and I love it like an old dog.

W114, 1975 280E Custard Yellow,
-Great above decks needs chassis welding--Really will do it this year....

My 240 doesn't have any.

They run just over $50 on Fastlane.

__________________

This is for the 300SDL - and it is over $201 on FastLane - it's the engine shock mount that's bad, not the shock itself, but in order to install the engine shock I need a good mount for it.... that's the kicker...

Trying to decide if it's really worth spending over $200 for something that really isn't necessary, but then again, the engineers have put it there for some reason...

James

__________________
1987 Mercedes 300SDL; SOLD
1985 Mercedes 300D; SOLD
2006 Honda Pilot - wife's ride; 122K;
1995 Toyota Land Cruiser - 3X locked; 182K

You could always look in a junkyard.

__________________

Here in the U.S. that's not the case.

__________________
83 SD

84 CD

? All four of our 617 powered cars have two of them. I had a worn out shock on one side of my engine so I just left it off when I reinstalled the motor in my car....makes no difference, though, probably since the shock was dead. I don't mind a small shake when I turn off the car....its perfectly smooth when running.

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)

YES they are needed...

Unless you want premature engine mount failure, and excess engine shake at idle.

__________________
ASE Master Mechanic
asemastermechanic@juno.com

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
1984 190D
2003 Volvo V70
2002 Honda Civic

https://www.boldegoist.com/

No self-respecting Mercedes Owner would ever get parts at a junkyard. However, the local environmentally friendly, and green dismantling and recycling center for automobiles may be a good source for such a part.

__________________
1982 300SD " Wotan" ..On the road as of Jan 8, 2007 with Historic Tags

Ridiculous much! Call it what you want. Men's Mall I've heard it called as well. I'm a self respecting MB Owner and I go to the junkyards. It's all used parts that are worthless to their previous owner.

You'll never find a brand new M-pump, and even if you could it would cost you several suitcases full of cash. I found one at the junkyard for $10.

90% of the wrecking yards I've been to are far from green. They may be reselling parts and recycling the cars, but with all the fluid and oil slicks that are on the ground, I think that it wouldn't qualify them as green.

__________________

I also got mine at the Junkyard. It was $2.50 for the upper and lower.

__________________
84 300D, 82 Volvo 244Gl Diesel

You didn't appreciate my attempt at pompous, self-righteous humor?

__________________
1982 300SD " Wotan" ..On the road as of Jan 8, 2007 with Historic Tags

My '81 300CD had two dampers and the european 617 I pulled from a 300D did as well. However they both (all four) were shot, as the typically don't last very long... I'll be going without them, their just too expensive for how long they last and how little they really do.