|
|
|
|
View Poll Results: OE axles rebooted with flex interest? | |||
I MUST have OE rebooted axles!!! | 14 | 73.68% | |
I have NO interest in OE rebooted axles | 1 | 5.26% | |
Reman axles are fine as long as they are a good company | 4 | 21.05% | |
I'm trying the chinease ones... 75.00 can't be wrong!! | 0 | 0% | |
Voters: 19. You may not vote on this poll |
|
LinkBack | Thread Tools | Display Modes |
#46
|
||||
|
||||
yeah, the circlip on the pin for the fingers of the gun is simple to remove, then just push out the pin, and pull the fingers. the steel piston glide pops out and each finger is made of two slats of steel. the stamping of the slats leaves a rough edge and it tears the small end of the boots. a little polishing on the grinder and reassembly and perfect function!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#47
|
||||
|
||||
Well, nothing's split open yet. They'd better last several years; I'd just as soon never have to do that again. I will if I have to. Hoping I'm lucky and will evade the predictions of the "They look too flimsy to last" sayers.
|
#48
|
||||
|
||||
working with the boots in the winter time is a PAIN! I'm keeping the boots in the house, and warming up the shop before the install next time. MAN it was a pain to get the boots done on the last axle!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#49
|
||||
|
||||
Pics coming up, John
__________________
[/SIGPIC]~cirrusman 1983 Mercedes Benz 300SD - Wife calls him "Chitty Chitty Bang Bang" [SIGPIC] 1983 Toyota Tercel (Tommy, The little Toyota that could) 1965 Ford F100 (Grandma Ford) 2005 Toyota Sienna (Elsa, Wife's ride) Gone: 1988 Toyota Pickup 2004 Subaru Outback 1987 Cadillac Fleetwood Brougham 1986 Volvo 740 GL Station Wagon - Piece of junk. 1981 Volvo 242 DL 2 Door - Hated to see it go. R.I.P. 1987 Pontiac Fiero GT |
#50
|
||||
|
||||
awesome!
how did the axle look to you? any critiques for my future rebooting? my last axle was an annular one, and it was awesome! the thing was powdercoated! it cleaned up REALLY well. I wish I had more of the annulars! all the axles I have left are homokinetic.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#51
|
||||
|
||||
ok, after seeing the annular axle I decided to wire wheel the cans & shaft, and put black engine enamel on. they look great! the rest will get this care now! place your orders!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#52
|
||||
|
||||
Are they still available?
I will be needing a set for my w126 soon (1983 300SD).
|
#53
|
||||
|
||||
83 300sd - boot replacement.
Where would I find the best do it yourself (DIY) step-by-step instructions for the entire rear axle CV Boot repair/replacement? Youtube... you guys would be the ones to ask.
__________________
MJMoon '83 300SD 460,000 miles (+ 3 years w/odo not working) |
#54
|
||||
|
||||
this is a good repair pictorial.
http://www.dieselgiant.com/mercedesaxleshaftbootreplace.htm
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#55
|
||||
|
||||
need a pair
PM me. w123 82 240D.
__________________
1982 240 D, 308,000 - 321,127 miles (sold) 1982 300 TD,166,500 - 226,000 miles 1998 E 320, 120,000 - 144,000 miles 2005 C 230 K, 26,000 - 77,000 miles (sold) |
#56
|
||||
|
||||
I got several sets of each now, I like them, and I've gotten GREAT feedback from the members who have purchased them.
so far, NOBODY has any problems with the axles, and I'm at year 3 now!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#57
|
||||
|
||||
124 and 201's are now getting done. I'm using the flexx boots, but if I can find OE boots, they are also an option.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#58
|
||||
|
||||
Anecdotal story on CV joints:
I also own a 2004 Honda CR-V. Right now my son is driving that up at Clemson while his wagon is undergoing major rehab at vstech's. Before I let him take it up there in August, I knew it needed new CV joints. I looked at reman axles and was about to buy a set and have vstech help me swap them. However he and I both got real busy so I ended up taking it to the local Honda dealer. The advisor, knowing that it was an older car, offered remans to save some money. I went for it and told them to go ahead and use them. Long story short, after 3 sets of reman axles, we ended up going with OE. The vibration was so bad on each set of remans that they never even released the car to me between sets.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech |
#59
|
|||
|
|||
John, any W123 re-boots available and if so for how much? Been too scared to ask until now. My boots are crazing so doubt I have another ten years...
__________________
Current fleet: 1985 Mercedes-Benz 280TE - Waiting for heart surgery. 1985 Mercedes-Benz 300TDT - Rear ended 23 September 2016 and now looking for a new home. 1979 Mercedes-Benz 300TD - Parted out. 1964 Volkswgen Beetle - Vater's since September 1968 and undergoing a restoration. 1971 Volkswagen Sunroof Squareback with F.I. - in need of full restoration. 1971 Volkswagen Squareback automatic with F.I. - Vacationing with her caretaker until he is in better health. |
#60
|
||||
|
||||
I'll check. I'm NEARLY free of items on my immediate todolist...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|