|
|
|
|
|
#1
03-22-2010, 08:36 AM
|
|||
|
|||
|
need help with removing inner door panel
My power window made some horrible noises the other day while I raised it and now won't budge. So I tried to remove the driver side inside door panel last night to see what's up. It seems I found all the screws and fasteners that hold it in place but then it seemed to be hung up on the inside door handle (where you pull to unlatch the door). Anybody know what kind of linkage is back there and how to disengage it? Thanks.
|
|
#2
03-22-2010, 08:41 AM
|
||||
|
||||
|
yes, you have to remove the black plastic, and then take out the screw behind it...
assuming you have a 123 or a 126... not sure what other vehicles would hold the door panel on with. (it helps if you post the type of car in the question)
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!!  1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
|
#5
03-22-2010, 05:38 PM
|
||||
|
||||
|
If it's the same as a 123, yes, you can use a flat head to gently pry out the black plastic. I like to start on the front (closest to the firewall) side then pull it out of the back, both the opposite will get you there too....
__________________
 Current Mercedes 1979 maple yellow 240D 4-speed Gone and fondly remembered: 1980 orient red 240D 4-speed Gone and NOT fondly remembered: 1982 Chna Blue 300TD Other car in the stable: 2013 VW Jetta Sportwagen TDI / 6-speed MT
|
|
#6
03-22-2010, 08:52 PM
|
||||
|
||||
|
the plastic under the door opener handle.
not the plastic around the outside of the handle... again, on a 123... no idea what a 210 handle would look like... but I bet it's the same.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
|
#7
03-22-2010, 10:45 PM
|
|||
|
|||
|
Quote:
Also on the 123, after you have all the fasteners and screws out, you need to lift the panel straight up to disengage a clip in a slot inside - about the middle of the panel. Joseph
|
|
#8
03-23-2010, 02:15 AM
|
||||
|
||||
|
Answer
Quote:
Inner Door Panel Removal DIY Links Have a great day.
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/
|
 |
| Bookmarks |
|
|
Linear Mode
