|
|
|
#1
|
|||
|
|||
transmission cooler flow direction
I just brazed a hole in the transmission cooler line on the passenger side of an 85 TD. I want to flush the line before reinstalling, but I don't know if this is the line to the cooler or the return line.
Does anyone know which way the fluid flows on the passenger side transmission line? Thanks
__________________
1985 300 TD 448K 1984 300 TD 278K 1983 240D euro 240k 1994 f-250 idi turbo 330K 1986 f-350 IDI 1987 F-350 IDI 1985 JD 1050 4wd 1965 IH 3660 |
#2
|
||||
|
||||
If the line is off of the car, it should not matter which way to flush the line.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#3
|
|||
|
|||
I want to hook it up and let it pump transmission fluid through it, but if I hook up the wrong end it will suck the junk in.
I have already blown the line out with air, maybe I am being too paranoid.
__________________
1985 300 TD 448K 1984 300 TD 278K 1983 240D euro 240k 1994 f-250 idi turbo 330K 1986 f-350 IDI 1987 F-350 IDI 1985 JD 1050 4wd 1965 IH 3660 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|