|
|
|
#1
|
||||
|
||||
Generation II Lower Molding (W126)
Has anyone ever installed the Generation II lower molding on a Generation I car? The lower molding that goes below the doors. It looks pretty straight forward. It looks like I will only have to drill holes on the bottom for screws, and then I was thinking of using the 3M double sided tape to holed the top on since there are no holes for the clips.
Has anyone done this before?
__________________
1983 Toyota Tercel 4WD Wagon - 1984 Mercedes-Benz 300SD 4-Speed(My Car!) 2005 C230 Kompressor 6-Speed Manual
|
#2
|
||||
|
||||
Good question. I always thought that gen2 molding would be nice to hide the rust holes in my rockers.
__________________
08 R320 CDI current Past 95 E420 87 300D Turbo 5spd 90 300TE 83 300SD 85 300TD 92 400E 85 190D |
#3
|
|||
|
|||
if its anything like the W201 and W124 chassis cars, the cladding panels will attach quite easily with very minor if any modification but may require a trip to the stealership for a few choice clips.
__________________
1992 850i 6 speed 1991 M3 S54B32 swap 2007 328iT/6 RWD sport wagon 1987 325E 330iZHP engine swap 2004 Vespa 200GT 1976 W115 240D getting a much bigger engine. 5.5L 1997 R129 SL600 5AT |
#4
|
||||
|
||||
My understanding was that the Gen II were plug-n-play with the Gen I plastic pieces. I wanted to do this to my Gen I, but it's low on my priority list.
__________________
- Brian 1989 500SEL Euro 1966 250SE Cabriolet 1958 BMW Isetta 600 |
#5
|
||||
|
||||
I'm hoping to install them this weekend. Heres everything tonight out getting painted.
__________________
1983 Toyota Tercel 4WD Wagon - 1984 Mercedes-Benz 300SD 4-Speed(My Car!) 2005 C230 Kompressor 6-Speed Manual
|
#6
|
||||
|
||||
Cool! Where did you get those parts/panels? And did you paint them yourself? I too would like to change mine out at some point. It's just that most of what I see in the salvage yards are the long wheelbase models, which obviously wouldn't work (at least the back doors wouldn't). I'm kind of thinking I'll just keep what I have until I repaint the cars, which is at least a few years away.
__________________
1986 300SDL - 116K 2014 Prius Plug-in (company car) 2014 Q5 TDI (wife's car) |
#7
|
||||
|
||||
Yeah I got all the molding off a 91 300SE that was fresh out at the junk yard when i found it. I've had the upper part (the parts that are normally on the get 1) on my car for some time, the lower parts have been in my attic. the last few weeks i've been trying to get them all on my car. painted everything... except for the rear bumper. waiting on that till this is all on the car because I've run out of saw horse space.
__________________
1983 Toyota Tercel 4WD Wagon - 1984 Mercedes-Benz 300SD 4-Speed(My Car!) 2005 C230 Kompressor 6-Speed Manual
|
Bookmarks |
|
|