|
|
|
#1
|
||||
|
||||
123 Dash swap question
Is it possible to remove and install the 123 dash without removing the steering wheel? The dash is out of the donor, removed the steering wheel & A pillar trim but cant the wheel off the TD. I have heard it can be done, yes, no, maybe Another option is the glass guy is coming out in the near future to replace the windshield. I wonder if it would slip right in there with the windshield out? I could also try harder on the steering wheel nut, impact wrench wouldn't get it.
__________________
1985 Euro 240D 5 spd 140K 1979 240D 5 spd, 40K on engine rebuild 1994 Dodge/Cummins, 5 spd, 121K 1964 Allice Chalmers D15 tractor 2014 Kubota L3800 tractor 1964 VW bug "Lifes too short to drive a boring car" |
#2
|
||||
|
||||
Yes you can install the dash without removing the steering wheel. I've done it. You just have more room with it out.
__________________
Andrew '04 Jetta TDI Wagon '82 300TD ~ Winnie ~ Sold '77 300D ~ Sold
|
#3
|
|||
|
|||
Loosen and remove the two nuts (I think they're 13s) on the steering column support and the steering wheel/column will drop down allowing the dash to clear. Before fully re-installing the dash just make sure to secure the steering column to its support.
|
#4
|
||||
|
||||
hellatious torque is needed to get some steering wheel nuts loose!
like a 6' cheater bar on a 3/4" hinge handle torque!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#5
|
||||
|
||||
I like it!! Thanks
__________________
1985 Euro 240D 5 spd 140K 1979 240D 5 spd, 40K on engine rebuild 1994 Dodge/Cummins, 5 spd, 121K 1964 Allice Chalmers D15 tractor 2014 Kubota L3800 tractor 1964 VW bug "Lifes too short to drive a boring car" |
#6
|
||||
|
||||
It seems to me the 'early" 123s used a big nut which you could get some thread loosening liquid on but the allen bolt can be a real bugger. Dropping the steering column sounds like the way to go. I would just as soon be done when the glass guy gets here. Thanks
__________________
1985 Euro 240D 5 spd 140K 1979 240D 5 spd, 40K on engine rebuild 1994 Dodge/Cummins, 5 spd, 121K 1964 Allice Chalmers D15 tractor 2014 Kubota L3800 tractor 1964 VW bug "Lifes too short to drive a boring car" |
#7
|
||||
|
||||
It's definitely possible...I've done it several times. You just have to twist the dash a bit, and remove it through the passenger front door.
__________________
Current cars: 2000 ML55 AMG, 174k miles 2003 C240 T-Modell, 202k miles 1995 S320, 207k Miles |
Bookmarks |
|
|