I came off on the freeway!
I had to get CHP to push me off the freeway and towed.

I can't find them anywhere. Does anyone know where to buy them?

It popped back in and is working. The socket that came off was the linkage that runs next to the injection pump.

Thank you for any help

Nick

Dealer. As a temp fix I've used a candy bar wrapper (Mylar/silver plastic stuff) two layers over the ball and popped the socket over it. Works for a while.
Hope this works attached is the EPC with part numbers. Hope that is what your looking for:

Attached Thumbnails

 

__________________
92 300D 2.5L OM602 OBK #59

Can`t those plastic sockets be up graded to the metal ones used on the W123 and W126?

or are they metal? seem like I read later models used plastic and a member up graded them.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works

I pulled all the linkage off a 83 parts car, and had a welder make correct length linkage that was reliable.
you can't change just the ends, the 124 linkage is flat metal pressed into the plastic ends...
total crap.

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

There was a recall on them, not sure what years it covered.

__________________

Gone to the dark side

- Jeff

Metal ball on rods.

Well, they lasted 18 years.