Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-16-2001, 10:33 PM
PeterG
Guest
 
Posts: n/a
Heater Control Valve 79 300SD How do you re-sinc it and calibrate.

This has been posted already on the Diesel post site. But I was directed here by the moderator.
This is to clarify my message from the last post. The subject might help (I'm new at this as you can see). I have a heater control valve that I have dismantled cleaned, and reassembled. I found the line up pins on the gears, and have tried to keep everything in sinc, but I think the feedback pot was set up to around 4K ohms, How critical is this setting, and where should the valve be positioned. When I took it apart I found it in the mid position. Also for those who would like to know, I might have found a replacement for the little motor inside I am waiting for a call back from the motor manufacturer.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page