|
|
|
#1
|
|||
|
|||
What is this part and where can I get one ASAP! Help!
Got to get my car back on the road ASAP! I was driving down the road yesterday, hit the brakes, heard a loud clunk. Car pulls to the right really hard, especially when using the brakes now. Got home, had a look, obviously something not right here. The bar that attaches to the upper control arm and prevents the UCA from moving fore and aft has broken where it attaches to the UCA. I cant find a name for this part, nor can I find where I can get one. Anyone have a name or part number or place that sells them? Thanks in advance. Attached is a picture of the carnage
Also, is there just a nut under the battery/washer reservoir that holds this in? WHats the proper procedure for removing the broken arm? Thanks again! 1983 300SD |
#2
|
||||
|
||||
If it goes through to the other side of the car the same way it's an anti-sway bar, or sway bar, or stabilizer bar.
I'm not that familiar with w123 suspension, but becoming very familiar with w124 suspension.
__________________
Cheers! Scott McPhee 1987 300D |
#3
|
|||
|
|||
__________________
1982 300SD 180K, rebuilt engine 1973 450SLC Megasquirt 1990 Volvo 780 - 273k 1993 Volvo 240 Wagon - Scrap yard slumber http://www.fuelly.com/sig-us/44619.png |
#4
|
|||
|
|||
Looks like you may need a few parts. But, the anti-sway bar may not be broken. It has threads inside the end that is in the picture and two rubber doughnuts, two metal washers, and a bolt hold the assembly together. It could be there are enough threads left you can get a bolt started and have a sos so fix. Phil on here sells the rubber bushings. a hard bolt and large washers and you could be up and running. On the other hand you most like should check that UCA by pulling it and having a look see. Good luck thanks
__________________
83 300D 227,xxx miles, sold 86 300 SDL 130,000 miles, sold |
#5
|
|||
|
|||
W123/W126 sway bar saver
123/126 front sway bar saver
W126 The EPIC has BEGUN... Project "Sway" is Underway! QP1000 Torsion Bar Saver W123, W126 S-Class here are a few options for you Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works Last edited by whunter; 08-01-2010 at 12:55 PM. |
#6
|
||||
|
||||
This is the part you want*
http://www.peachparts.com/diy/mb_tools/mb_tools.php?page=35
Use a grinder with cutoff wheel to cut your existing bar. The new part is a socket weld fitting that caps the end of the existing sway bar. Much faster - much cheaper, especially for an SD. It was about $125 when I bought one (mid 2009). * = for future posterity's sake: Note that the WAGONS have a larger diameter sway bar and this part WILL NOT FIT WITHOUT MODIFICATION.
__________________
1985 300TD 387k 1985 300CD (calif.) sold 1983 300D sold |
#7
|
||||
|
||||
It looks like it whacked your shock as well on the top. While you're there...........
__________________
'70 F100 shortbed '82 Diesel Westy '83 Euro 300TD Curtlo Viper Yeti ARC Surly long haul trucker |
#8
|
|||
|
|||
Thanks for the replies everyone. Looks like this is a great forum for our cars. Ive been through lots of cars and always join the best associated forum, looks like I have found the on for my 300SD! Ive been lurking here for a couple weeks. Just picked up my 83 300SD a couple days ago and already have a huge problem. Argh! Makes me wonder if the PO knew about it or 1/2 ass fixed it! Oh well, ITs a nice car and I plan to keep her going as long as I can afford to do so!
THanks again!! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|