|
|
|
#1
|
|||
|
|||
Where is the OVP relay in a 93 300D?
It's not in the fuse box behind the fuses.
|
#2
|
||||
|
||||
It's in the cubby behind the battery. Remove the plastic shield to reveal the ABS controller, Klima relay, OVP relay, etc.
Sixto 87 300D |
#3
|
|||
|
|||
Thanks I found it. It tests good but there is something loose inside when I shake it. Could it still be bad? ABS light on and tach not working. Can it be opened up without damage to look inside?
|
#4
|
||||
|
||||
Some folks redo the solders to get it working again so go ahead and open it. Something loose inside doesn't sound right.
Sixto 87 300D |
#5
|
|||
|
|||
It was just a plastic insulator that was loose. What pins can I jumper to bypass as a test to see if the tach works or ABS light goes out? I ran it without the relay installed and no change. From the date on it of 0493 I'm sure it's original and the car has over 300K but I want to make sure it's bad before replacing it.
|
#6
|
|||
|
|||
The part number on it is 2015403845 and has 7 pins. Is the replacement now a 9 pin #2015403745? Are the ones made by URO for $24 any good?
|
#7
|
||||
|
||||
I've had my share of fitment problems with Uro but an OVP is fairly generic and not mission critical, outside of needing the airbag , that I'd risk it.
Sixto 87 300D |
#8
|
|||
|
|||
I got it today and plugged it in, tach now works and the ABS light goes off. Best $29 I've spent in a while.
|
Bookmarks |
|
|