hi, i have used the search and peeled through pages of threads, so i was hoping someone could help me out or point me in the right direction.

i have a 91 300d. and it leaks from multiple places. and i mean MULTIPLE. i am getting ready to yank the engine and replace every seal from the oil pain to the intake seperator seal and everything in between.

what i need is a simple list of torque specs covering these, to include crank caps for the mains, bolts for the head, etc. i still have the haynes manual from my 85 and while i know the engines are different, i was wondering if they are close enough to use most of those values. and if not, is there a place here or somewhere else that i could find that list.

much thanks for any help

__________________
91 300D, 194,000m
08 Tacoma prerunner
92 Nighthawk cb750
65 Mustang coupe 67,000 original miles
05 murry lawnmower, ellz yeah
01 c240

You can get a manual from MBUSA that has all the tightening torques
as well as a lot of other useful information you might need.

It's called Technical Data Passenger Cars.

Go to google and type in "MBUSA technical data"
that should get you to the correct site quickly.

Jeff

__________________
1984 300SD 300,000 miles--two tank WVO setup
2.88 diff & 500SEL anti-squat rear end

Everything you need is here ,Except the Torque specs for the Vacuum Pump
bolts.

http://w124-zone.com/downloads/MB%20CD/W124/Main.html

__________________
'84 300SD sold
124.128

rooster, compress, army, i cant thank you guys enough. i found all i needed, and enough reading to keep me busy for weeks. thank you, thank you, thank you guys very much!!!

__________________
91 300D, 194,000m
08 Tacoma prerunner
92 Nighthawk cb750
65 Mustang coupe 67,000 original miles
05 murry lawnmower, ellz yeah
01 c240