will euro bumpers fit easily on 79300sd
can they mount without any changes,do you need extra hardware?where can i get some
|
anyone know
|
if they are w123 wraparound kind you need the accompanying euro side trim--behind the front bumper ends and the bolt on brkts that go with them
Sorry I didn't see the sd--They are the same US and euro arent they on the 116? |
no on usa they are huge and extended on euro their very small -i think
|
Big Difference
|
IIRC the bumpers are interchangeable with existing hardware but the bumper shock openings on the body will be visible around the smaller Euro bumpers. The corner trim pieces are the same or close enough, those bits still on the red car in the picture.
Sixto 87 300D |
That euro car is missing its bumpers. There should be another bumper below the upper chrome strip, just like the US car. They're just much thinner.
-J |
Quote:
The Euro bumpers on W116 look like this http://farm4.static.flickr.com/3029/...c54_z.jpg?zz=1 http://farm1.static.flickr.com/73/16...42e7bd6f_z.jpg |
Quote:
|
hmmm the 74 116 450SDL seems to have euro bumpers in the pullapart I went to saturday... I will have to get a pic of it tomorrow...
|
I think that to install Euro bumpers on a W116 you need to cut away the "mounting bracket" that is welded to the body up front. For the rear, you need to drill a hole in between the 4 mounting holes on each side, or something. It's a bit tricky, I hear!
|
|
i checked with good mbz yard and they said they just bolt right on
|
Everyone I know who has done the bumper swap said they had to remove sections of metal and drill new mounting holes. I know for a fact they won't bolt in directly.
|
All times are GMT -4. The time now is 12:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website