|
|
|
#1
|
|||
|
|||
Coolant flush before oil cooler line replace?
I need to flush out my coolant and put in new fluid. Is it OK to go ahead and do that while I'm waiting to get parts for my oil cooler line job? I would hate to flush it out and put all new coolant in to have it drained again during the next job. I'm going to replace the engine mounts/shocks at the same time at the oil cooler lines.
__________________
"Gerwalt" 1984 - 300TD |
#2
|
||||
|
||||
No problem. Two systems are not related...
Go for it :-)
__________________
------------------------------- '85 300D, 'Lance',250k, ... winter beater (100k on franken-Frybrid 3 Valve Kit) '82 300D, 'Tex', 228k body / 170k engine ... summer car '83 300TD Cali Wagon 210k, wife's car |
#3
|
||||
|
||||
well... it's POSSIBLE that the radiator might need removing during the hose change, and a proper flush needs you to run the engine... and I don't recommend you running YOUR engine with that hose on there. so, I'd hold off.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
Bookmarks |
|
|