|
|
|
#1
|
||||
|
||||
Is there a radial measurment on axle wear?
OK. the axles I'm pulling out of my cars to sell, I want to know if there is anything I can measure to be sure I don't sell any worn axles.
I am only booting the untorn axles. if the boot is torn, or has been rebooted before, I am not selling it. If when I open up the boot, there is not clean oil inside, I'm not rebooting it. I am rebooting the axles that have cracked rubber original MB boots on them ONLY. so far all the axles I've opened up have had 0 slop. I've compared it to the slop I had in my torn and driven hard 82 axles that were making a little noise but no clunks. there was about .020 slop enough to feel. none of the axles I am rebooting have any hand detectable play. NOW TAKING ORDERS!!! FS Rebooted OE pulled, axles.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#2
|
||||
|
||||
John,
As long as there is no signs of metal in the lube in the joints when you take the boots off, they should be good. If they are still tight all the better. I have heard of new balls being put in them to tighten them. Having seen some noisy ones ( not MB), I found that I could feel the ware on the surfaces where the balls sit. It was as if they had been rubbing in the 1 spot for a long time, the ware spot was easily felt. Swapping sides does make a difference. You may wish to recommend what side they are put on if you know what side they came off. New boots & they will probably outlast a couple of the Chinese ones!!!!!
__________________
Grumpy Old Diesel Owners Club group I no longer question authority, I annoy authority. More effect, less effort.... 1967 230-6 auto parts car. rust bucket. 1980 300D now parts car 800k miles 1984 300D 500k miles 1987 250td 160k miles English import 2001 jeep turbo diesel 130k miles 1998 jeep tdi ~ followed me home. Needs a turbo. 1968 Ford F750 truck. 6-354 diesel conversion. Other toys ~J.D.,Cat & GM ~ mainly earth moving |
Bookmarks |
|
|