|
|
|
#1
|
||||
|
||||
How is this supposed to work? Washer Fluid "Y".
The "Y" in my washer fluid line on my '83 SD leaks like a sieve. The pic is after I removed a rubber sleeve that covered it. Is the sleeve supposed to keep it from leaking, or do I just need to replace the "Y"? It leaks a lot but I can't find any cracks. Maybe I should cut and reattach the hoses to get a better fit? Any help is appreciated.
__________________
Muleears '07 E320 Bluetec 133K my DD '04 Jaguar XJ8 VDP, 34K '10 Hyundai Accent 60K Grocery Getter '02 VW Golf soon to be on the road again '97 E300 Diesel Son's DD '61 VERY tolerant wife Hampton Roads, VA USA Gone but not forgotten: '67 250S 95K '86 300SDL '87 300D Turbo, 364K! R.I.P. '98 E300 Turbodiesel, 213K '02 S420, 164K '01 Prius 138K |
#2
|
|||
|
|||
I just replaced mine yesterday.
It is actually a check valve/splitter. I would recommend replacing the hoses too. You can get everything for under $20 US. The new hoses are nice and soft and seal well around the check valve. Mine did not have a rubber covering on it.
__________________
----Adam 1985 300SD 322,000 |
#3
|
||||
|
||||
Where did the get the parts? Can I get them at fastlane or do I have to go to the stealership?
__________________
Muleears '07 E320 Bluetec 133K my DD '04 Jaguar XJ8 VDP, 34K '10 Hyundai Accent 60K Grocery Getter '02 VW Golf soon to be on the road again '97 E300 Diesel Son's DD '61 VERY tolerant wife Hampton Roads, VA USA Gone but not forgotten: '67 250S 95K '86 300SDL '87 300D Turbo, 364K! R.I.P. '98 E300 Turbodiesel, 213K '02 S420, 164K '01 Prius 138K |
#4
|
||||
|
||||
The rubber sleeve you removed keeps the fluid from draining back into the reservoir and the pressure created by the washer pump pushes the fluid past the sleeve and out the hoses to your nozzles.
I bought everything needed from ********, but FastLane/All Parts Express can get anything you need even if it's not listed in their catalog. Just call them. EDIT: As yours is now in the pic, the fluid will just squirt out of the holes closest to the single hose side. I tried to fix one before by wrapping it with rubber tape and putting the hard plastic shell back on, but it didn't work. The new check valve is only a couple dollars.
__________________
Chad 2006 Nissan Pathfinder LE 1998 Acura 3.0 CL OBK#44 "Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.) SOLD 1985 300TD - Red Dragon 1986 300SDL - Coda 1991 - 300TE 1995 - E320 1985 300CD - Gladys |
#5
|
|||
|
|||
X2 from Chad
__________________
----Adam 1985 300SD 322,000 |
#6
|
||||
|
||||
Mine was leaking last summer. I just wrapped some teflon tape around it and worked fine. I'm replacing the hoses next time I get around to. I'm lazy.
__________________
[/SIGPIC]~cirrusman 1983 Mercedes Benz 300SD - Wife calls him "Chitty Chitty Bang Bang" [SIGPIC] 1983 Toyota Tercel (Tommy, The little Toyota that could) 1965 Ford F100 (Grandma Ford) 2005 Toyota Sienna (Elsa, Wife's ride) Gone: 1988 Toyota Pickup 2004 Subaru Outback 1987 Cadillac Fleetwood Brougham 1986 Volvo 740 GL Station Wagon - Piece of junk. 1981 Volvo 242 DL 2 Door - Hated to see it go. R.I.P. 1987 Pontiac Fiero GT |
Bookmarks |
|
|