I need a heater hose part number
 

Getting my 617 turbo into my nice 240D. But I can't find the correct hose that would run from the drivers side firewall heater connection to the water connection middle of the drivers side of head behind IP. Hose fitting on fire wall is 18mm, hose fitting on head is 21mm. Fast Lane sells a tapered meter long piece I suspect is designed to be cut off at where ever it fits best. Is this type of hose bendable or usable when bent. However I would rather have the correct hose if I could find the number.

Are you able to locate the hose you seek in the pic?

Thanks, but that is not correct
 

That is a 300D with a monovalve. I would love to see the picture or drawup of the 300D with manual heat controls and no auxilary water pump. But thanks for the picture. I sure do miss that old "Romainian" parts listing that was recently removed from the net. It was so much easier to use then EPCnet. But it is gone!

I know this is an old thread but can anyone give me a part number on hose # 299 in the pic? I can't seem to find it on EPC net.
thanks
Tony

How about this?

HEATING WATER CONNECTION. Fits: 1981 Mercedes 300 TD TURBODIESEL Wagon | Mercedes-Benz of South Atlanta

Should be 123 832 91 94

To make it fair

Pelican Parts - Automotive Parts and Accessories - Porsche & BMW

Thanks Stretch!
 

That helps quite a bit. cheers

He want's the hose that would be the same at number 257 in this diagram. I say, would be, because for the manual climate system, I think there is another curve, as the one end goes to a stub coming out of the firewall, where as the hose in this diagram connects to the pipe that is mounted to the firewall.

Jim asked the question ages ago about a part - I'm quite sure he doesn't need it now as his car has been running for ages...

...thread was revived by BoneSinSC probably after an image search on google - I think the question has been answered but if more information / better information is needed please say.