|
|
|
#1
|
|||
|
|||
1999 E300TD Glow Plug Question??? Please Help!!!
Well after fighting with my glow plugs and breaking two off I got the one out without hurting anything. I need to know what is the thread pitch for the glow plugs. As I want to ream and re tap the glow plug holes... And if you know who has the tool that would be helpful and if I dont have a reamer what can I use instead of the $80 part.
Thanks in advance.... George |
#2
|
||||
|
||||
The Threads are 12x1.25
The Reamer part of the Factory Reamer is 7mm. If you are interested in a homemade Glow Plug Reamer like the one below (that is a 6 Flute/Groove Reamer on the end not a Drill Bit) let me know.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#3
|
|||
|
|||
Thanks I appreciate that..... Any idea how I can make a reamer as I want the car back on the road sooner vs later but will not put back until its done as I dont want this problem ever again as this is the carbon not the threads .... Thanks
|
#4
|
||||
|
||||
Some members have used a Drill Bit twisted by hand.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#5
|
|||
|
|||
How do you make the one that you have in the picture and how well did that work. If you could share how you made it that would be great. I see its a glow plug cut but where did you get the reamer and what specificly is it? Thanks so much I appreciate your help..
|
#6
|
|||
|
|||
You need to get the proper reamer tool. Anything less and you will be right back were you are now in short order. I am speaking from experience.
__________________
Greg 2012 S350 BlueTEC 4Matic 2007 ML 320 CDI 2007 Leisure Travel Serenity 2006 Sprinter 432k 2005 E320 CDI 1998 SLK230 (teal) 1998 SLK230 (silver) 1996 E300D 99k, 30k on WVO Previous: 1983 240D, on WVO 1982 300D, on WVO 1983 300CD, on WVO 1986 300SDL 237k, 25k on WVO (Deerslayer) 1991 350SDL 249k, 56k on WVO - Retired to a car spa in Phoenix 1983 380 SEC w/603 diesel, 8k on WVO 1996 E300D 351k, 177k on WVO |
#7
|
||||
|
||||
You broke 2 off but got one out? If there is still one stuck in the head, I'd take it off and send it to Metric Motors to see if they can take it out
I believe I have the proper reaming tool so if you want to borrow it, I can lend it but if you have a stuck plug, don't try to force it out. It will wreck your head.
__________________
01 Ford Excursion Powerstroke 99 E300 Turbodiesel 91 Vette with 383 motor 05 Polaris Sportsman 800 EFI 06 Polaris Sportsman 500 EFI 03 SeaDoo GTX SC Red 03 SeaDoo GTX SC Yellow 04 Tailgator 21 ft Toy Hauler 11 Harley Davidson 883 SuperLow |
#8
|
|||
|
|||
99 E300 TD Stuck 2 glow plugs.... Need Help!!!!!
Ok I have drilled one out and have the threads completely removed from the glow plug end and the damn thing has not released itself..... How can I take the rest out??? THis is ridiculous..... How hard is it to take the head off and where are the instructions.... I do not see this in the diy section.... What a nightmare......
|
#9
|
||||
|
||||
Quote:
__________________
01 Ford Excursion Powerstroke 99 E300 Turbodiesel 91 Vette with 383 motor 05 Polaris Sportsman 800 EFI 06 Polaris Sportsman 500 EFI 03 SeaDoo GTX SC Red 03 SeaDoo GTX SC Yellow 04 Tailgator 21 ft Toy Hauler 11 Harley Davidson 883 SuperLow |
#10
|
|||
|
|||
what is fubared the head? I got the threads out but the damn thing aint moving How can the carbon hold the damn thing in?
|
#11
|
|||
|
|||
Are you talking about you screwed the plug in to far? i have not drilled or touched the threads>
|
#12
|
||||
|
||||
Quote:
The tip might have swelled up. Supposedly the Bosch ones in the Powerstroke engines have that issue. The carbon could have formed around the GP tip. I have the reamer to clean that and I do that every year. Your only option is to crank it and hope the pressure pushes it out. That or you can try soak it with Liquid Wrench of something like that and drill a hole in the GP, screw a long screw in and try to pull it out.
__________________
01 Ford Excursion Powerstroke 99 E300 Turbodiesel 91 Vette with 383 motor 05 Polaris Sportsman 800 EFI 06 Polaris Sportsman 500 EFI 03 SeaDoo GTX SC Red 03 SeaDoo GTX SC Yellow 04 Tailgator 21 ft Toy Hauler 11 Harley Davidson 883 SuperLow |
#13
|
||||
|
||||
I am saying that my drill bit was off a few degrees and it gouged the metal head. Solution was to tap the threads further down and seal the GP to the head. As such, there wasn't as much sticking out of the head as with the others.
__________________
01 Ford Excursion Powerstroke 99 E300 Turbodiesel 91 Vette with 383 motor 05 Polaris Sportsman 800 EFI 06 Polaris Sportsman 500 EFI 03 SeaDoo GTX SC Red 03 SeaDoo GTX SC Yellow 04 Tailgator 21 ft Toy Hauler 11 Harley Davidson 883 SuperLow |
#14
|
|||
|
|||
thats funny i needed the humor! no i dont believe i did that yet..... how can i pull it? i soked it with pb but no luck!
|
#15
|
||||
|
||||
Quote:
Drill a smaller hole into the GP so that you can start a screw in it. When it has gone in deep enough, try to pull it out. I really think that at this point, you would be better pulling the head.
__________________
01 Ford Excursion Powerstroke 99 E300 Turbodiesel 91 Vette with 383 motor 05 Polaris Sportsman 800 EFI 06 Polaris Sportsman 500 EFI 03 SeaDoo GTX SC Red 03 SeaDoo GTX SC Yellow 04 Tailgator 21 ft Toy Hauler 11 Harley Davidson 883 SuperLow |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|