|
|
|
#16
|
|||
|
|||
Gotcha! my threads are not touched! i cant find the reamer! And want to re tap and cant find that any place local r we sure its 12mm 1.25 pitch?
|
#17
|
|||
|
|||
have you pulled your head? how much work is it and i dont have the diy link...
|
#18
|
||||
|
||||
Quote:
Metric Motors. http://www.mercedesengines.net/
__________________
01 Ford Excursion Powerstroke 99 E300 Turbodiesel 91 Vette with 383 motor 05 Polaris Sportsman 800 EFI 06 Polaris Sportsman 500 EFI 03 SeaDoo GTX SC Red 03 SeaDoo GTX SC Yellow 04 Tailgator 21 ft Toy Hauler 11 Harley Davidson 883 SuperLow |
#19
|
||||
|
||||
It is some work involved. I got a tech to do it for me on the side.
__________________
01 Ford Excursion Powerstroke 99 E300 Turbodiesel 91 Vette with 383 motor 05 Polaris Sportsman 800 EFI 06 Polaris Sportsman 500 EFI 03 SeaDoo GTX SC Red 03 SeaDoo GTX SC Yellow 04 Tailgator 21 ft Toy Hauler 11 Harley Davidson 883 SuperLow |
#20
|
|||
|
|||
Pulling the head is a LOT of work.
I won't go there unless you have exhausted ALL possibilities. What actually is your problem? You have a broken GP in the head that you cannot take out? There should be quite a few threads here to extract broken GP.
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
#21
|
|||
|
|||
thanks.... its nuts to do.....i redid an evaporator on an s class and that was a job....
|
#22
|
|||
|
|||
got 4 gp out safely and and have one without the threads in the way and the one stuck in. If I crank the car can anything slip into the engine? Not sure what the prechambers on the other end look like??? I will crank.... I have not messed up the threads or drilled the wrong angle.... I have taken my time....
|
#23
|
|||
|
|||
You have 2 GP stuck that you cannot get out? Have you try blow torch them or use penetration oil?
Can you get a socket to them or they are completely rounded? If they are rounded then it is no different from extracting a bolt. I would do a search on the data base to see how they can be extracted. May be you need to drill a hole and use an extraction bit. If the worst come to the worst then pulling the head may be the only way out. Good luck.
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
#24
|
|||
|
|||
Have you tapped the inside of the GP shaft and used a home made puller on it yet?
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#25
|
||||
|
||||
OTOH, maybe pulling the head might not be a bad idea. You get to have the head reworked and find out whether things are sealing right and if not, get it fixed. I had to replace all the intake valves and most of the exhaust so I said "Screw it, new valves". Can't remember what was wrong with the valve right now.
__________________
01 Ford Excursion Powerstroke 99 E300 Turbodiesel 91 Vette with 383 motor 05 Polaris Sportsman 800 EFI 06 Polaris Sportsman 500 EFI 03 SeaDoo GTX SC Red 03 SeaDoo GTX SC Yellow 04 Tailgator 21 ft Toy Hauler 11 Harley Davidson 883 SuperLow |
#26
|
||||
|
||||
Quote:
The Reamers can be purchased from any company that supplies stuff for Machinest. There might even be a Company in your area. The draw back is that if you only buy one Reamer from the supply company there is a shipping charge if you do not buy one local. When I started off making the longer Reamers I was not using a Glow Plug Body to mount the Reamer in; see thumbnail. But, it was a lot of work to make them that way.
__________________
84 300D, 82 Volvo 244Gl Diesel Last edited by Diesel911; 12-30-2010 at 04:14 PM. |
#27
|
||||
|
||||
Drilling out broke Glow Plugs
http://alan.mcreynolds.googlepages.com/howtoremovebrokenglowplugs-mercedesom606 Another drill out thread but different http://www.peachparts.com/Wikka/OM606BrokenGlowPlug Another drill out thread- check and see if it is the same as the 1st one http://www.peachparts.com/Wikka/BrokenGlowPlug
__________________
84 300D, 82 Volvo 244Gl Diesel |
#28
|
|||
|
|||
This seems like what you need to be doing. Shouldn't be too hard to find the detailed write up searching 606 glow plugs.
__________________
1996 E300 110,000 1985 300TD 212,000 1980 300D 238,000 |
#29
|
|||
|
|||
Here is my experience with drilling a plug out - E300TD glow plug stuck/broken
Haven't heard from the original poster in a month, so I'm assuming he figured things out. I haven't checked this forum for a long time and I'm likely too late, but I do have the proper reamer and tap and a few other things needed or helpful for removing glow plugs on the E300's.
__________________
Len '59 220S Cabriolet-SOLD and living happily in Malta '83 240D 351,500 miles original owner-SOLD '88 560SL 41,000 miles - totaled and parted out https://sites.google.com/site/mercedesstuff/home '99 E300 turbo 227,500 miles '03 SLK320 40,000 miles - gave to my daughter '14 Smart electric coupe 28,500 miles '14 Smart electric cabriolet 28,500 miles '15 Smart electric coupe 28,000 miles |
#30
|
|||
|
|||
What is the length of the tool from the bottom of the threads to the tip?
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|