|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Need help sorting out transmission part numbers and where to buy...
Firstly, I could use a suggestion where to buy these transmission parts,
or even a pointer to whomever can help me sort out which part numbers I need.... I'm looking at the parts diagrams for the 722.118 trans in my '81 300D and trying to cross reference to the factory manual/ATSG manual parts diagram. the parts diagram is a lot more primitive and the parts have different names or are not shown, or drawn in wrong location or matched with the wrong parts...... anyone familiar with these parts? I need from the factory/ATSG manual diagram: #50 "Filter" -- Is this parts diagram item#640 (A 115 270 02 98) #11 "Shift Valve releasing end B 2" -- Is this parts diagram item #635 (A 115 277 40 29) or maybe #648 (A 115 270 04 70) #26a "Detent valve K 2" Spring for #26a "Detent valve K 2" Spring for #50 "Filter" -- Is this parts diagram #636 (A 116 993 70 01) (and same spring for #11 and #26a in factory manual?) Spring for #11 "Shift Valve releasing end B 2" Spring for #34 "Pressure relief valve modulating pressure" --- Is this parts diagram # 673 (A 115 993 97 03)? what spring in the factory manual is parts diagram #648 (which is just shown by itself - A 116 993 69 01 - relay valve B2)??? I have a spring, but not sure if it is the #34 one or the #11/#26a/#50 one, is there a picture or some way to tell the difference by coil count or ???? or maybe these parts are cheap? Also on the parts diagram I see a reference to a "Throttle check valve" (A 115 270 25 89) which is no longer available. can anyone tell me which item this is in the factory/ATSG manual diagram? hopefully it's not one of the ones I need.... Thanks in advance. |
#2
|
||||
|
||||
Answer
You have e-mail.
MB# 115 270 02 98 $1.40 MB# 115 277 40 29 superseded or NLA. MB# A 115 270 04 70 $115.36 MB# 116 993 70 01 $14.00 MB# 115 993 97 03 superseded or NLA. MB# 116 993 69 01 $4.70 .
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
#3
|
|||
|
|||
OK. clearly
MB# A 115 270 04 70 $115.36 is not the right part as the parts I need are little plastic pieces & springs.... plus a few ball bearings..... the parts diagram I'm mentioning is attached..... to clarify I need from the shop manual diagram #50, spring for #50, #11, spring for #11 #34, spring for #34 #26a, spring for #26a and I cannot determine which parts those are in the parts diagrams as the names are all different and the drawing is different/missing things, and things drawn in the wrong location..... if someone is familiar with these parts.... |
Bookmarks |
|
|