Fleetguard 5319
 

Hi,

On the road right now... Happened upon two fleetguard ff5319 filters that seriously fell off a truck (stopped and rescued two off the road - the third was crushed).

Will this work on an om 616/617?

Thanks!

Not even remotely. The stud hole is about 1/2" too large.

... not unless you buy a base for it and mount it somewhere on the car.

The FF5319 is a 2 micron filter at 92% efficiency which cross referenced to the 2 micron absolute CAT 1R-0749 filter. This filter is the taller version of the 2 micron absolute CAT 1R-0750 that is used by forum member Diesel911 on his 300D and by many VW TDI'ers, Duramaxer's and etc.

Diesel911 made an adapter to use the CAT 1R-0750, if you want to use the filter, you might want to contact him to see if he's willing to make and sell one to you.


http://www.peachparts.com/shopforum/1885860-post10.html


.
.

No it isn't. The thread size is different.

They both use the same 1"-14 thread size.

Fleetfilter cross reference lookup.
http://www.cumminsfiltration.com/catalog/jsp/index.jsp?crossreference=yes


CAT 1R-0749, FF5319
Largest OD: 93.47 mm (3.68 in)
Overall Height: 240.54 mm (9.47 in)
Thread Size: 1-14 UNS-2B
http://www.cumminsfiltration.com/cat...ges/FF5319.JPG



CAT 1R-0750, FF5320
Largest OD: 93.47 mm (3.68 in)
Overall Height: 176.28 mm (6.94 in)
Thread Size: 1-14 UNS-2B
http://www.cumminsfiltration.com/cat...ges/FF5320.JPG




The CAT 1R-0750 is considered the "short" version of the 1R-0749.



.