|
|
|
#1
|
|||
|
|||
Help Id'ing part in '81 300d tansmission valve body
I have a spring for a 722.118 transmission valve body which
I can't identify the part number or where it belongs. see attached picture (spring at far left), and parts diagrams. it's either: (spring for #50, spring for #11 , spring for #34 or spring for #26a ) anyone familiar with these parts who has taken this apart? if so, can you tell me which one it is? thanks. |
#2
|
|||
|
|||
I have a 722.117 valve body, still assembled, off the
transmission that i can take measurements from. What's the spring length you seek?
__________________
--frankb 1982 300TD 617.912 <NLA> . 1975 2002 E10-EFI . 1976 914c6 . 1983 MG LMIII <NLA>. 1988 Montero / 616<NLA> . 2001 TLS . 2005 Saab 9-5 Wagon |
#3
|
|||
|
|||
Right now, I'm guessing that it is the #34 spring which goes with a ball 5.5mm
ball valve as I found a passage from the service manual mentioning that #34 is .6mm wire dia. and #11, #26a and #50 are 0.45mm wire dia. So far I'm guessing that in the picture (left to right) they are: #37/spring, #24/spring, #38/spring, #41/spring, #34 spring if you can verify that would be really appreciated. I'd hate to assemble and find things not working because I guessed wrong. (do you have the steps to dis-assemble properly per the service manual - ie. don't just take apart and lose or have all the pieces fall out) ps. that spring is 1/2" long. |
#4
|
|||
|
|||
sent you a PM.
__________________
--frankb 1982 300TD 617.912 <NLA> . 1975 2002 E10-EFI . 1976 914c6 . 1983 MG LMIII <NLA>. 1988 Montero / 616<NLA> . 2001 TLS . 2005 Saab 9-5 Wagon |
Bookmarks |
|
|