|
|
|
|
|
#1
02-16-2011, 03:38 PM
|
||||
|
||||
|
...'87 300D, Changing Injection Pump Nozzel Seals???...
...Are there any tricks to this???...
|
|
#2
02-16-2011, 04:12 PM
|
||||
|
||||
|
Nozzle seals? Heat shields? Or are you talking about the delivery seals?
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42
|
|
#3
02-16-2011, 06:51 PM
|
||||
|
||||
|
The Injectors on the Cylinder Hear have Heat Shields between the Injector and the Precombustion Chamber. You remove the Injectors to change them.
Inside of the Injector there is a spray Nozzle. See rebuilding Injectors to find out info. If your Fuel Injection Pump is leaking Fuel at the top where the Fuel Injection Tubing/Hard Lines screw on to what is below the Fue Injection Tubing/hard Lines are the Delivery Valve Holders or the Factory Service Manual sometimes calls them Pipes. Each Delivery Valve Holder is sealed with O-rings and a copper colored Crush Washer. Changing the Delivery Valve Holder Seals is one of the jobs that everthing needs to be extremely clean and you need to completely understand the Instructions and follow them exactly. DIY Repair Links http://www.peachparts.com/shopforum/diy-links-parts-category/ http://www.peachparts.com/Wikka/DoItYourSelf
__________________
84 300D, 82 Volvo 244Gl Diesel
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
