|
|
|
#1
|
||||
|
||||
? BillyBob?
Anyone know how to get in touch with him? I am going to be doing a timing chain replacement before too long and he is the only one listed in the tool rental program with the crimper tool. The problem is there is no contact info in his profile! TIA Don
__________________
Red Green "This is only temporary,Unless it works!" 97 E300D 157000 miles 87 300TD ?141k? miles |
#2
|
|||
|
|||
I was under the Impression that Brian Carlton had one as well.
|
#3
|
||||
|
||||
I got one. But unfortunately the double row adapter is lost and it is currenly set up for a single. I need to order one.
If Brian doesn't have it or you can't get in touch with BillyBob, I'll order the adapter and you can rent mine. .
__________________
1983 123.133 California - GreaseCar Veg System |
#4
|
|||
|
|||
While I do think the crimper tool , with its reversible anvil for first putting it together and then mushrooming the head of the pin , is GREAT.... that can also be done with things like vise grips for the first action and a ball peen hammer with larger hammer on the backside...
there is a LOT of discussion on this in the archives... use Larry Bible as the poster to search. What most people do not understand is that once you have the pin in place... it is a tight fit and thus ANY mushrooming of the head , since a double roller chain has no side pressure to speak of, works fine... hard hits are not necessary... many small taps around the edge of the head works just fine.
__________________
1980 240d , chain elongation, cam marks reference: http://www.peachparts.com/shopforum/diesel-discussion/10414-help-i-need-check-stretch.html http://www.peachparts.com/shopforum/diesel-discussion/305365-9-degrees-chain-stretch.html evap fin cleaning: http://www.peachparts.com/shopforum/diesel-discussion/156207-photo-step-step-post-showing-w123-evaporator-removal-1983-240d-1982-300td.html?highlight=evaporator A/C thread http://www.peachparts.com/shopforum/diesel-discussion/297462-c-recommendations-mb-vehicles.html |
#5
|
||||
|
||||
Quote:
__________________
|
#6
|
|||
|
|||
Quote:
anyone know what he did to get banned?
__________________
1987 300SDL "Rudolf" 239k 8/10 Gone but not forgotten -1980 F250 4X4 351C Snowplow "The Beast" -1976 Caddy Eldo Convertible, in triple red. "Red headed Slut" -2002 Honda Accord EX-V6 loaded 107k, My first brand new car! *IM A HORRIBLE SPELLER* |
#7
|
||||
|
||||
it's best not to ask these things...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#8
|
||||
|
||||
May be Billybob uses the same name on another forum; like Benzworld and could be contacted there.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#9
|
||||
|
||||
I think using the Timing Chain Crimping Tool is way more likely to produce a consistent good result in the hands of someone who has never done that sort of work before then peening with a Hammer.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#10
|
||||
|
||||
Haha you must not go over to OD much The mods do ttheir duty well.
__________________
TC Current stable: - 2004 Mazda RALLYWANKEL - 2007 Saturn sky redline - 2004 Explorer...under surgery. Past: 135i, GTI, 300E, 300SD, 300SD, Stealth |
#11
|
|||
|
|||
Thats correct i dont frequent the Open Discussion forum often. BillyBob got an attitude with me when i contacted him requarding renting/loaning a tool so im not too concerned from a 'friendly' point mainly more of a "oh look over there what happened"
__________________
1987 300SDL "Rudolf" 239k 8/10 Gone but not forgotten -1980 F250 4X4 351C Snowplow "The Beast" -1976 Caddy Eldo Convertible, in triple red. "Red headed Slut" -2002 Honda Accord EX-V6 loaded 107k, My first brand new car! *IM A HORRIBLE SPELLER* |
#12
|
|||
|
|||
I do have the crimping tool and rent it out frequently. Contact me via e-mail for arrangements.
|
#13
|
||||
|
||||
I have one with both bits also. Ball joint press (the real one), LCA press I think, spring compressor, misc 617 tools, misc 603 tools, misc 116/7 tools, misc 103 tools, etc
PM or email if you need to bum something.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#14
|
||||
|
||||
Brian & Hitman
Thanks for the replys, i am not going to be doing it right away but its great to know that i will be ale to rent one when the time comes,just too many projects all at one time! Thanks Don
__________________
Red Green "This is only temporary,Unless it works!" 97 E300D 157000 miles 87 300TD ?141k? miles |
#15
|
||||
|
||||
I am still trying to contact Billybob with no success about a bumper he has, but no luck. Anyone could give me any leads?
__________________
[GONE] - 1995 Mercedes E300 Diesel - 130k miles - Smoke Silver (702) over Mushroom leather (265) - Bladder blasting, coast-to-coast work machine. |
Bookmarks |
|
|