|
|
|
#1
|
|||
|
|||
1985 300SD and 1987 300SDL rear differential
The gear ratio is the same at 2.88. Are they the same and interchangeable?
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
#2
|
|||
|
|||
anyone?
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
#3
|
||||
|
||||
I would say they are if they bolt up. not 100% on this though.
__________________
hum..... 1987 300TD 311,000M Stolen. Presumed destroyed |
#4
|
||||
|
||||
its different the 85 SD has the axle shafts going into the diff and you need to take the diff cover off to get the lock clips out to pull the axles (thats how it was of my 85 SD). The 87 SDL has flanges on the diff and the axles bolt up to the flanges on the diff side. If I recall the mounting points are different as well but don't quote me on that.
__________________
OBJECTS IN MIRROR ARE CLOSER THAN THEY APPEAR, ONLY IN A BENZ 89 560SEC 90 350SDL (Rudolph) 91 350SDL (300SDL drivetrain) 87 BMW 635CSi (Swanhild) 89 BMW M6 (euro) 99 Suzuki Hayabusa (Only the fastest thing ever) |
#5
|
|||
|
|||
W126 81 to 85 first generation, and 86 to 91 are second generation.
First gen rear suspention is the same as the W123 rear suspention. The second gen W126 is a different mounting on the differential. The flanges mentioned might be the bolted on weights, but I suspect the second gen uus the Annular and or Homokenic type axles. Bottom line is, the second gen will not directly bolt onto the first generation W126. Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works |
Bookmarks |
|
|