Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-28-2011, 06:06 PM
Registered User
 
Join Date: Mar 2006
Posts: 545
The importance of getting underneath your car

This posting is especially aimed at new members.

With these old cars it's essential you get under your car regularly to give it a thorough inspection. Do this safely - there are postings here on how to do support your car safely - do NOT get underneath when the car is supported only with a jack.

Courtesy of a friendly indie we put my 300SD up on a hoist a week ago and spent an hour going over the underside. What you may find may be bad news, but at least you will know the true state of your ride.

What we found was

- rust in the rear wheel wells. Not too bad but some minor welding needed,
- front crank seal starting to leak, replacement sometime down the road
- centre exhaust rubber mounts starting to go, all cracked
- front fender liners giving up the ghost and letting road crud into the rockers
- weeping diesel line, which we replaced on the spot by cutting out the weak spot and replacing it with some flexible hose

Depending on your pocket book you may not want to do everything yourself. But if you know the true state of your car it will put you in a much better position to deal intelligently with your mechanic or to plan what work you need to do yourself.

Reply With Quote
  #2  
Old 02-28-2011, 06:10 PM
tbomachines's Avatar
ಠ_ಠ
 
Join Date: Mar 2009
Location: Philadelphia
Posts: 7,366
Those front fender covers seem to be a common wear item after all these years I am in fact stripping down my SD's wheel well tonight and welding in a patch panel...Truck bed lining, undercoat, and lots of POR-15 on order.
__________________
TC
Current stable:
- 2004 Mazda RALLYWANKEL
- 2007 Saturn sky redline
- 2004 Explorer...under surgery.

Past: 135i, GTI, 300E, 300SD, 300SD, Stealth
Reply With Quote
  #3  
Old 02-28-2011, 06:21 PM
Stevo's Avatar
Registered User
 
Join Date: Apr 2002
Location: NW WA
Posts: 6,299
I'll tell you what I found. I bought a rundown 240D cheap from a neighbor, drove it for a while and finally got around to looking it over underneath, There was ONE bolt left in the fwd flex disc and the bolts in the rear disc were lose
__________________


1985 Euro 240D 5 spd 140K
1979 240D 5 spd, 40K on engine rebuild
1994 Dodge/Cummins, 5 spd, 121K
1964 Allice Chalmers D15 tractor
2014 Kubota L3800 tractor
1964 VW bug

"Lifes too short to drive a boring car"
Reply With Quote
  #4  
Old 02-28-2011, 10:16 PM
Registered User
 
Join Date: Jan 2001
Location: Alexandria, Virginia
Posts: 5,480
In addition to the usual holes I found in a rusty 240D I purchased a few years ago, I discovered the outer rear leg of the front passenger-seat dangling in air, while the front-pasenger seatbelt was anchored only to carpet!

Happy Motoring, Mark
__________________
DrDKW
Reply With Quote
  #5  
Old 03-01-2011, 12:48 AM
Registered User
 
Join Date: Mar 2006
Posts: 545
Quote:
Originally Posted by tbomachines View Post
Those front fender covers seem to be a common wear item after all these years I am in fact stripping down my SD's wheel well tonight and welding in a patch panel...Truck bed lining, undercoat, and lots of POR-15 on order.
Yes, I was thinking of doing the same thing. I have new liners on order from Phil at Fastlane though.
Reply With Quote
  #6  
Old 03-01-2011, 08:07 AM
Registered User
 
Join Date: Jan 2001
Location: Alexandria, Virginia
Posts: 5,480
On one of my 240Ds, I replaced the skimpy front fender blocking panels with full fender liners from a late '82 W123. Too late for some of the rust already there.

Happy Motoring, Mark
__________________
DrDKW
Reply With Quote
  #7  
Old 03-01-2011, 08:13 AM
oldsinner111's Avatar
lied to for years
 
Join Date: Nov 2008
Location: Elizabethton, TN
Posts: 6,246
Something else should be mentioned,as I used these for years.
Don't use cinder blocks,I used them for years with heavy vehicles.I did not know how easy they can shatter.
__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran
Reply With Quote
  #8  
Old 03-01-2011, 08:16 AM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 13,648
man crushed by Mercedes
__________________
Jim
Reply With Quote
  #9  
Old 03-01-2011, 09:17 AM
tbomachines's Avatar
ಠ_ಠ
 
Join Date: Mar 2009
Location: Philadelphia
Posts: 7,366
Quote:
Originally Posted by engatwork View Post
Tragic anybody know if he was a forum member?
__________________
TC
Current stable:
- 2004 Mazda RALLYWANKEL
- 2007 Saturn sky redline
- 2004 Explorer...under surgery.

Past: 135i, GTI, 300E, 300SD, 300SD, Stealth
Reply With Quote
  #10  
Old 03-01-2011, 11:16 AM
junqueyardjim's Avatar
Registered User
 
Join Date: Apr 2005
Location: Cicero, Hamilton County, Indiana about 30 miles north of downtown Indianapolis
Posts: 2,623
Just would like to mention that if you are short on welding skills or probably don't have a welder there are other good ways to fix or repair those rusty section of fender liners, ect, any sheet metal part which is put there to protect the bottom side of exterior sheet metal. Here is what you do. Clean the area up and paint it with black POR. It has to be the underside because black POR can't handle much UV, (sun lite). Then when you have it painted with POR, get some nice pieces of plastic from gallon antifreeze jugs. A lot of products come in those gallon jugs and that plastic is so tough. If the area is flat, use the sides, it you need to fill a corner, use a corner, even a three sided corner can be repaired. I used the two part JB Weld to glue it to the area that has been painted with POR. It is a little slow to stick together, the warmer the quicker, so be patient and it will set in. Once it is stuck together only grinding will get it off. I even did the rocker panels on my 85 that way, Being exterior, I had to do it very carefully, but it worked well. It was all junk and soft, I could not have lifted that car an inch on the jack holes, it was all "make up". But it worked for me. I didn't need the jack holes but I wanted it to look decent. And it even looked good after I parted the car out and the junkyard came to pick it up. Yes, I thought, those rocker panels still look good after 4 or 5 years.
__________________
Junqueyardjim
Christianity, if false, is of no importance, and if true, of infinite importance. The only thing it cannot be is moderately important. C.S. Lewis



1983 Mercedes W123 240D 4 Speed 285,000 on the road with a 617 turbo, beautiful butter yellow, license plate # 83 240D INDIANA

2003 Jaguar Type X, AWD. beautiful, good mileage,
Mom's car, but I won't let her drive it!
Reply With Quote
  #11  
Old 03-01-2011, 02:39 PM
whunter's Avatar
Moderator
 
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,416
FYI

No vehicle is worth risking your life.

Man Crushed working on car
Man Crushed working on car

Health & Safety
Health & Safety

Who has the most rust and still drives
Who has the most rust and still drives

Bodywork, Fast search Links
Bodywork, Fast search Links







.
__________________
ASE Master Mechanic
asemastermechanic@juno.com

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
1984 190D
2003 Volvo V70
2002 Honda Civic

https://www.boldegoist.com/
Reply With Quote
  #12  
Old 03-01-2011, 03:12 PM
tbomachines's Avatar
ಠ_ಠ
 
Join Date: Mar 2009
Location: Philadelphia
Posts: 7,366
Quote:
Originally Posted by junqueyardjim View Post
Just would like to mention that if you are short on welding skills or probably don't have a welder there are other good ways to fix or repair those rusty section of fender liners, ect, any sheet metal part which is put there to protect the bottom side of exterior sheet metal. Here is what you do. Clean the area up and paint it with black POR. It has to be the underside because black POR can't handle much UV, (sun lite). Then when you have it painted with POR, get some nice pieces of plastic from gallon antifreeze jugs. A lot of products come in those gallon jugs and that plastic is so tough. If the area is flat, use the sides, it you need to fill a corner, use a corner, even a three sided corner can be repaired. I used the two part JB Weld to glue it to the area that has been painted with POR. It is a little slow to stick together, the warmer the quicker, so be patient and it will set in. Once it is stuck together only grinding will get it off. I even did the rocker panels on my 85 that way, Being exterior, I had to do it very carefully, but it worked well. It was all junk and soft, I could not have lifted that car an inch on the jack holes, it was all "make up". But it worked for me. I didn't need the jack holes but I wanted it to look decent. And it even looked good after I parted the car out and the junkyard came to pick it up. Yes, I thought, those rocker panels still look good after 4 or 5 years.
If you are going the JB route, you are much better off just going for a fiberglass repair. Obviously not as good as welding, but JB wasn't meant for bodywork. Also, JB is extremely brittle so any flexing will crack it (I've had that happen). Edit: Anything structural NEEDS to be welded. Many parts on our cars are structural in some way so there are very limited areas where fiberglass/JB would work. Those solutions are not nearly as strong as a properly welded patch panel.
__________________
TC
Current stable:
- 2004 Mazda RALLYWANKEL
- 2007 Saturn sky redline
- 2004 Explorer...under surgery.

Past: 135i, GTI, 300E, 300SD, 300SD, Stealth
Reply With Quote
  #13  
Old 03-02-2011, 10:52 AM
Stevo's Avatar
Registered User
 
Join Date: Apr 2002
Location: NW WA
Posts: 6,299
Quote:
Originally Posted by Mark DiSilvestro View Post
In addition to the usual holes I found in a rusty 240D I purchased a few years ago, I discovered the outer rear leg of the front passenger-seat dangling in air, while the front-pasenger seatbelt was anchored only to carpet!

Happy Motoring, Mark
The result of that could have been the speedy removal of your passenger's hemmies, not such a happy motoring day
__________________


1985 Euro 240D 5 spd 140K
1979 240D 5 spd, 40K on engine rebuild
1994 Dodge/Cummins, 5 spd, 121K
1964 Allice Chalmers D15 tractor
2014 Kubota L3800 tractor
1964 VW bug

"Lifes too short to drive a boring car"
Reply With Quote
  #14  
Old 03-02-2011, 11:00 AM
scottmcphee's Avatar
1987 w124 300D
 
Join Date: Mar 2008
Location: Edmonton, Canada
Posts: 1,539
If I'm working under the car a while, I usually bring stacked spare wheels and stacked heavy timbers under there with me to keep me company. If the car falls off the stands, they're my best friends.
__________________
Cheers!
Scott McPhee

1987 300D
Reply With Quote
  #15  
Old 03-02-2011, 04:13 PM
Registered User
 
Join Date: Mar 2006
Posts: 545
safety underneath the car

Quote:
Originally Posted by scottmcphee View Post
If I'm working under the car a while, I usually bring stacked spare wheels and stacked heavy timbers under there with me to keep me company. If the car falls off the stands, they're my best friends.
Agreed 100%

When working on my David Brown 990 tractor we used to support it on 12"x12" timbers, which worked great. For the 300SD I use 6x6 timbers as back up.

Roy posted some good ideas previously in this thread. Do NOT rely on one form of support.

And always wear eye protection. It's amazing how much crud comes off, especially if the car lives in a winter climate with lots of sand or salt on the roads.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page