|
|
|
#1
|
|||
|
|||
Transmission crush washer questions
Hello,
Getting ready to service tranny on '81 300TD. I looked all over, but I couldn't find information on the following questions: Does the torque convertor drain plug have a crush washer? If so, what size? What size is the pan drain plug crush washer? My kit from NAPA didn't have one. Thanks,
__________________
Brad 1981 300TD - daily driver 1963 Chevy II 2001 F-250 7.3 Power Stroke |
#2
|
||||
|
||||
I get some conflicting info, but the bottom line is the bolt plug size is 10 x 1 x 8 mm, so the inside diameter (I.D.) is 10mm. The outside diameter (O.D.) is not critical, as it doesn't fit down into anything.
Aluminum or copper is just fine. The pan drain plug is the same dimension.
__________________
83 SD 84 CD |
#3
|
|||
|
|||
Thanks for the information. I looked on Fastlane, but I guess I didn't look in the right places.
__________________
Brad 1981 300TD - daily driver 1963 Chevy II 2001 F-250 7.3 Power Stroke |
Bookmarks |
|
|