I need to remove the lower exterior door panels to purge some rust spots.
Does anyone have experience at this - it appears to be fairly simple if I can find the attachment points etc.
Would appreciate input from someone who has removed and reinstalled these panels.

There are two screws at one end (rear on front doors, front at rear doors IIRC), then the upper edge is in T-slots so the trim needs to be slid forward/backward (depending on whether it's a front or rear door). The lower edge is less forgiving as the clips are snap in/out, and older ones are sometimes brittle and will break, you might need to replace a couple/few.

__________________

Gone to the dark side

- Jeff