![]() |
Drive train vibration 85 300SD
I drove about 600 miles yesterday and for the first time had a full trunk, fuel tank and 3 passengers. I started to notice a dull vibration as I would press the accelerator pedal slightly to go up some long inclines. Also as I would decelerate there was a sound almost like a rubbing sound coming from the back.
I am obviously thinking drive line ( rubber coupling ) I will crawl under her later and see whats up she made it home fine with an average speed of 75 mph ( not my normal speed but just to keep up with traffic. Thoughts Alan |
Quote:
When my similar Drive Shaft Support Bearing went bad on another Vehicle; I had jacked the Rear Wheels off of the Ground and put it into gear. The Drive Shaft Support bounced up and down as the Drive Shaft Rotated. When I got the Support loose you could feel that the Bearing was clearly bad. Differential Oil level? Rear Wheel Bearing or Axle problems will be harder to pin point. |
1 Attachment(s)
Agreed, a visual check for the flex disc's and try to rotate the drive shaft to see any play in the center bearing.
|
I had a bad vibration soon after I got the car back on the road a few years ago. It turned out to be the rubber bushing on the center bearing support was shot.
|
All times are GMT -4. The time now is 02:01 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website