What are the bolts that hold the a/c compressor to it's bracket called? At least one of them has come out, are there 3 or 4? It wobbles around now so I took the belt off for the time being till I get a chance to fix it.

Man...... they put it in a hard place to get to, any tricks to it?

__________________
1985 300D Turbo ~225k
2000 F350 (Powerstroke) 4X4, SWB, CC, SRW, 6spd ~148k
1999 International 4900, DT466e (250hp/660 ft/lbs), Allison MD3060 ~73k

There are three of them and they all have 19MM heads. One only goes in with a washer on it, I think that is the top one. The second one down has a spacer on it about 4 inches long. The third one has another bracket which also mounts the oil cooler line hoses. There is also a couple more spacers(1/2 inch ) between the bolts and the master bracket . They are all three very tough to get in and out and you had better have a 19mm regular wench and a short 19mm socket handy. The space is so tight that you just about have to turn each bolt a thread at a time.

Good Luck

Have been there / Done this before

MBJOE

Thanks, do you remember if the bolts were all the same length? hopefully I can find the little bolts for the brackets that are missing. Then, when it warms up I can get the system charged and hopefully, it will work again. I think it has a leak, it stopped working all of the sudden.

__________________
1985 300D Turbo ~225k
2000 F350 (Powerstroke) 4X4, SWB, CC, SRW, 6spd ~148k
1999 International 4900, DT466e (250hp/660 ft/lbs), Allison MD3060 ~73k