PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   pulling the 603 head question (http://www.peachparts.com/shopforum/diesel-discussion/298326-pulling-603-head-question.html)

MTUpower 05-03-2011 05:57 PM

pulling the 603 head question
 
So I'm pulling the 603 head and close to and below the timing chain appears to be a allen headed bolt low and on the passenger side. Any clue as to what fits that so I can complete the pulling job? The car is not at my house so I'll want to bring the correct tools to the car. Thanks
William

Jeremy5848 05-03-2011 08:08 PM

Unless you mean the timing chain tensioner (32 mm socket), there is no such bolt on the OM603 engine. I just pulled and replaced my 603 head and found nothing that would match your description.

babymog 05-03-2011 10:13 PM

If you're talking about the two allen-head bolts down in the timing chain cavity, I believe that they're 6mm but might be 5mm.

Jeremy5848 05-03-2011 11:29 PM

Oh, inside the timing case! Thought you meant outside. Yes, 6 mm. Make sure you have a high-quality hex tool, these bolts are tight and you don't want to break your tool or strip the head. Also, stuff some rags into the chain case and have a magnet handy. The screw heads have a washer that you don't want to drop.


All times are GMT -4. The time now is 05:55 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website