|
|
|
#1
|
|||
|
|||
Turn signal relay fix 300sd
Problem: light will come on but turn signal not blinking on & off.
Fix: Pull instrument cluster, remove big black relay, clean posts & apply die-electric grease. Fixed problem. This may apply to other W126 models. I believe W123 relay is under center shifter console. Thought I would post this as a short cut for those with the problem as I had to read through a few posts chasing down false leads to get to this fix. If you have this problem I would try this first as it is so easy. Jeff
__________________
1984 300SD 300,000 miles--two tank WVO setup 2.88 diff & 500SEL anti-squat rear end |
#2
|
||||
|
||||
good advice, but this should be your second attempt at a repair.
first attempt should be to turn on and off your emergency flashers. then if the turn signals don't work move to the relay.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|