|
|
|
#16
|
||||
|
||||
it's not the location that i'm questioning. it's what do i need to do when the 240d car has the pencil style glow pugs and the motor that i'm putting in the (1980 240d) is a (1979 300d) with the loop style glow plug.
1. replace the entire system with the upgrade glow plug system 2. use the 240d relay -upgrade the GPs to pencil not sure what the correct combo would be. |
#17
|
|||
|
|||
#2. No need to buy the whole retrofit kit, just 5 retrofit pencil plugs. The only question is whether the relay used for a 616 is the same as the relay used in a 617 but with one less connection in the harness. If so, then all you'll need is a harness from a pencil plug 617. You could initially get by with just 4 glow plugs using the 240d pencil harness I think. You could also just run a jumper wire from the 4th plug to the 5th plug.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#18
|
||||
|
||||
it's alive!!!!!
it's alive!!!!!!!!!!!! it's alive!!!!!!!!!!!!!!!!! just waiting on the drive shaft to be cut. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|