Key On Engine Off Go Pedal Pulsation
Last evening, my hot wife and I went out on a date. When we got ready to leave, I noticed the go pedal started to pulsate, with the key on, during the glow cycle. Yes it was the pedal pulsating and not a result of the date...he he, lol. I have not noted this strange behavior before (the car, not the date) and was wondering if the cruise control actuator could possibly cause this, or something in the IP. After I started the engine, there was no noticeable engine erratic idle speed or pedal movement. Any ideas?
|
I think you need to see a doctor lol.
|
Hehe. Actually this really did happen. And I prolly do need to see a doc, but my car really did do as described. Thanks for humoring me funola.
|
Did you ever figure out what the problem was? does it still do it?
Charlie |
Cruise control actuator is the only thing I can think of that would do this. Mine's been mechanically disconnected since before I bought the car, but for a few weeks this summer it would randomly come on when the key was turned on. After a while it stopped without any intervention on my part.
|
I noticed that the 300d 2.5 that I am working on does the same thing.
|
Assuming you have a relay/buzzer that goes off when you turn the key to the glow position, prior to startup, it could be that unit making contact and transferring the vibration to the pedal.
|
All times are GMT -4. The time now is 07:23 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website