|
|
|
#31
|
||||
|
||||
HELP HELP
How do I remove the fan squirrel cage from the blower motor?
My new motor is coming today and I don't want to mess this up. Thanks, -BOB-
__________________
1991 350SD (updated rods) Biodiesel B100 when I can find it. Dino when really cold outside |
#32
|
|||
|
|||
I supported the fan with wood and then used a drift to tap out the motor.
|
#33
|
||||
|
||||
I used a few layers of cardboard on top of my vice and pounded the fan motor out of the fan with a drift and a 1lb hammer. The fan motor has splines on the shaft.
After installing the new fan the blower works great! The test wire I used to bypass the fuse does NOT get hot at all when I tested with the new motor. The new 30A fuse does not get the slightest bit warm with the fan on high. I found a non-attached SIRIUS tuner under my kick panel that I attached and an annoying rattle went away. Thanks for your help everyone.
__________________
1991 350SD (updated rods) Biodiesel B100 when I can find it. Dino when really cold outside |
Bookmarks |
|
|