Windows won't roll up
 

1984 300TDT - All of a sudden. Fuses are OK. Don't know what else to check. Rain is coming. HELP!

Oh, just for the heck of it, change the fuses... they can have very subtle cracks that make them look OK when they aren't.

Nothing to lose by changing, and who knows? ;)

Hold a window switch down and move the ignition switch a little bit. Maybe it's not quite making contact to the accessory circuit where it should. Cycle the key through a position or two and wiggle it around a little bit in the "run" position.

2 Fuses go to 4 Windows

There is also 1 Fuse that connects to some other things and the Power Window Relay; you will need to look on your Fuse Chart.

2 of my Windows did not work. When I looked at the Fuses they looked good. When I pulled the Fuses I found what is in the pic.
If the Fuse tips are not making good contact they are not going work correctly.

You can hotwire each window through the console switch connectors.

One possible cause of a four-point failure is the window relay.