|
Overboost switch
Can this switch be bypassed Safely on a 603?
|
I'd want to have a boost gauge hooked up first. To bypass it just unhook the connector. Or re-route the boost lines to bypass the changeover valve.
-J |
I have high doubts my turbo is boosting very much at all if any. I have the worlds slowest 300TD....
|
If you're just doing a test eliminate the whole overboost system: Re route the vacuum lines to send manifold pressure right to the ALDA. I would hook up a boost gauge too, you really want to know what things are doing.
-J |
why does the Alda have a Y split to it?
|
Because a line goes to the transmission modulator on the fender. It should firm up shifts when under boost. If you're doing a test remove everything from the ALDA system, then add things back one at a time.
-J |
I think with a turbo problem I have a vac issue I need to track down. but the turbo is higher up. burning more fuel without it. Thanks!
|
You really shouldnt without egt/boost gauge.
1987's dont have p2 flaps? |
| All times are GMT -4. The time now is 05:36 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website