|
|
|
#1
|
|||
|
|||
Resealed my Auxiliary Pump today
I checked to see if the Aux pump was any good, I want to use it for the intercooler, and after some oiling it ran, but it leaked.
I took the pump portion apart and found that the thrust seal was fine, but the rubber had shrunk and was no longer a tight fit in the plastic housing, the seals fell out. I cleaned everything up and put some Yamabond on the outside of the seals, put it back together and no leak. The trick is pressing off the impeller as everything is plastic. |
#2
|
||||
|
||||
YAMABOND FTW!!
WTF is YAMABOND?? Good job.
__________________
My occupational hazard bein' my occupation's just not around... 1980 300SD 1980 300SD |
#3
|
|||
|
|||
I probably misspelled it, I don't build dictionaries, lol. It is a sealant used by Yamaha.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|