PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   OM617 INTAKE and EXHAUST valve guide ID specification (http://www.peachparts.com/shopforum/diesel-discussion/306995-om617-intake-exhaust-valve-guide-id-specification.html)

whunter 10-17-2011 02:37 PM
OM617 INTAKE and EXHAUST valve guide ID specification
 
ALL OM617 cylinder heads

NEW perfect parts
OM617 INTAKE and EXHAUST valve guide ID specification is 10.000 MM - 10.015 MM.



.

vstech 10-17-2011 02:43 PM
this is the wear limit? or is it the specs for the new item?

whunter 10-17-2011 03:51 PM
Answer
 
1 Attachment(s)
Quote:
Originally Posted by vstech (Post 2811774)
this is the wear limit? or is it the specs for the new item?
Wear limit of valve guide ID (measuring point 5 mm above valve guide bottom edge) 0.20


Do NOT disturb the valve guide !!

Use a telescopic bore gauge to measure the inside diameter of the valve GUIDE 5 mm from the bottom.


.

whunter 10-17-2011 10:16 PM
How to use a telescopic bore gauge
 
Repeatability of telescoping gauges for an experienced hand? - Practical Machinist - Largest Manufacturing Technology Forum on the Web

Using telescopic bore gauges - The Home Shop Machinist & Machinist's Workshop Magazine's BBS

Telescopic Bore Gauge Set - YouTube

whunter 09-26-2013 12:21 PM
Recycled
 
for new owner


All times are GMT -4. The time now is 01:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website