PeachParts Mercedes-Benz Forum
Page 3 of 3 12 3
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   How hot does your OM603 run? (300SDL) (http://www.peachparts.com/shopforum/diesel-discussion/307780-how-hot-does-your-om603-run-300sdl.html)

treetrimmer 11-05-2011 12:36 PM
Also, being that the elbow fitting is just a vent hose, does it affect the operation of the VCV? Thx.

sixto 11-05-2011 12:46 PM
In my case, I couldn't get the minimum prescribed vacuum (12"Hg?) out of the VCV at idle. Shifts were stiff but not jarring.

The vent line is there so the vacuum pump draws cleaner cabin air

Sixto
87 300D

treetrimmer 11-07-2011 01:06 PM
Quote:
Originally Posted by sixto (Post 2823093)
In my case, I couldn't get the minimum prescribed vacuum (12"Hg?) out of the VCV at idle. Shifts were stiff but not jarring.

The vent line is there so the vacuum pump draws cleaner cabin air

Sixto
87 300D
Does anyone have confirmation via FSM on this 12" specification? Where do I measure it from exactly? Thanks, lots of good info here. :cool:

treetrimmer 11-08-2011 12:59 PM
*Bump*...anyone?


All times are GMT -4. The time now is 10:30 PM.
Page 3 of 3 12 3
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website