|
|
|
#1
|
|||
|
|||
240d injector pump ADA question
My 83 240d has a good amount of whitish gray smoke. It starts readily, idles smoothly and quietly but after the glow plug cycle, smoke appears and is pronounced when revving the engine.
I have: -adjusted valves -set ip timing to 24* (drip) -corrected chain elongation 4* woodruff key -filters changed -rebuilt injectors @130bar, good atomization -cold compression 300# all cylinders -hot compression 350-375# -good vacuum -minimal blowby -plugged egr lines for testing purposes When turning the screw on the ADA unit I cannot get black smoke even at full stop (anti-clockwise). The unit seem to function as there is lower power at full clockwise. The idle raises at full anti- clockwise. I am under the impression that full stop anti-clockwise should produce black smoke. Does this point to a problem with the ip and/ or ADA? Last edited by fochs; 02-11-2012 at 04:16 PM. Reason: tmi |
#2
|
|||
|
|||
The ADA only reduces the amount of fuel, it cannot increase it, so no black smoke.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|