Selected Tutorials from Bosch Diploma Course Modules – Any Interest here??
 

I have a considerable amount of training material from the early `80’s that I used for staff training at that time. It is now obsolete as most of it is in VHS audio/visual and Microfiche format. It covers, very thoroughly, Bosch M and MW fuel pumps, RW Governors and KCA Injectors among other things.

A few examples that may be of interest here are:

Module 4 – MW Pump operation – Pre Tech Service Training

Module 4 (2) M – Pump operation – Pre Tech Service Training.

Module 6 – KCA Injector Operation, Servicing and testing.

Module 4 (8) RW - Governor Operation and Service Training.

Currently I have only one, “MW Pump Operation”, in PDF format that I reformatted and uploaded to Acrobat to post on another Forum a number of years ago. I might be persuaded to reformat a few others if there is sufficient interest.

The VHS Audio-Visual instructional programs are excellent and run +/-35 mins but I’m afraid there’s no way that I’m going to convert to digital and upload them!

Module 4(3) MW Pump Operation is an example (without audio) and can be downloaded from Acrobat.com (2.5 Meg in PDF format) by way of this link. This one is very basic stuff but after reading some recent posts on Fuel Injection I believe it might help clear up many misunderstandings, misconceptions and even some fantasies on this subject.:)

The injector pump is my next area of interest. I think I've already got the PDFs you mention - I am interested in obtaining the VHS films though. There's a bloke near to me who converts loads of analogue formats to digital... do you think we could work something out? (I don't know - probably not - as you are where you are and I'm all the way over here!)

I'm in the middle of building my own test bench => this is a long term project though...