1985 300D Washer Nozzle Removal
How does one remove the windshield washer nozzles from a 1985 300D?
Regards, C |
1 Attachment(s)
Pipe key 10-11 mm
|
Quote:
|
Well I looked up this diagram to see if I could give you instructions as I had mine out a year or two ago. If I remember correctly, unhook the nozzle from the hose and very carefully, (I believe I used a very small 2" long vice grip), get a very gentle bite on the nozzle on the top side and carefully rotate it one quarter turn. http://mb.ilcats.ru/part/class/1/ccode/F/cat/68K/type/123/subtype/123/group/86
|
Something like the tool pictured in post #2 is the best way. I have an old typewriter tool that fits perfectly. I believe it is about 10mm ID. Any small piece of pipe that fits over the nozzle body from below and compresses the wings will work.
|
Thanks, all.
|
2 Attachment(s)
Here are a couple of pics.
|
A 1/4" pipe nipple, deburred on the inside, will push them right out.
|
All times are GMT -4. The time now is 07:10 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website