300cd teleflex sunroof cable tube removal
 

Do I really have to remove the windshield to get the teleflex tube out? I've flushed it with brake cleaner. It's clean as a whistle inside. The cable seems to hit an impediment about an inch before it goes through the back of the sunroof frame. I actually have the rear windshield seal, as there is a spot of rust on the left bottom corner on the outside of the rear windshield and I plan on pulling the windshield out to make sure the rust hasn't traveled deep into the car where I cannot see...but I'm hoping there's a way to get the teleflex tube out without dismantling so much...

Anybody have any thoughts on this?

Thanks,

David

Anybody? Teleflex tube removal sunroof...windshield?
 

Still not sure how to proceed here regarding teleflex tube. Must I really remove rear windshield to get this thing out? Somebody?

nothing really to add here, except that i recently removed my teleflex cable, cleaned it and relubed it. when i went to reinstall it, it hit numerous "snags" along the way, including one that i thought was impenetrable. i kept working it and eventually it went all the way in. whatever the "snag" was does not affect operation of the sunroof.. as it is now fully operational