|
|
|
#1
|
||||
|
||||
Antenna gear body opening
I have an antenna I'd like to pop the cover off of to inspect the gear. I'm having an issue feeding the new mast into it. The case is held together by interlocking plastic snaps and not bolts. Any tips on removal. Search showed no topic and this is for the antenna in my 87 300d
|
#2
|
||||
|
||||
Hirschmann Cover Tabs
Small Screwdriver
Patience Maybe a box of small round toothpicks / You wanna lay it down so the Pointy ends of the Tabs (Which are like 1/2 of an Arrow) are facing you. Then push them Inward towards the center of the cover to release. All the Googly Stuff: Jim's there First (As Always): http://www.k6jrf.com/MB_Hirsh.htm
__________________
'84 300SD sold 124.128 Last edited by compress ignite; 07-23-2012 at 03:07 AM. |
#3
|
||||
|
||||
perfect. Now I can poke around the inside and see if there is an extra parts of the old antenna left.
K6JRF Auto Page |
#4
|
||||
|
||||
Thanks , Don
I never looked to see if my "Pasting" of Jim's link worked.
Thanks for the correction !
__________________
'84 300SD sold 124.128 |
#5
|
||||
|
||||
Subscribed, thanx for leading me to this thread .
__________________
-Nate 1982 240D 408,XXX miles Ignorance is the mother of suspicion and fear is the father I did then what I knew how to do ~ now that I know better I do better |
Bookmarks |
|
|